I've pretty much finished the truck but I'm waiting on the interior. I'll try to upload a few finished pics.

[URL=http://s1174.photobucket.com/user/jyehsreh/media/7A0C78EB-6DD7-4463-80A1-453F198E63DB_zpsaeu0i3kr.jpg.html][img]http://i1174.photobucket.com/albums/r608/jyehsreh/7A0C78EB-6DD7-4463-80A1-453F198E63DB_zpsaeu0i3kr.jpg[/img] [/url] [URL=http://s1174.photobucket.com/user/jyehsreh/media/1E8A1EDB-5BE...

Ran into a couple problems lowering the bed down. I currently have the bottom of the cab mouldings at 36 inches from the ground. To keep the bed braces it can only be 38 inches from the ground. I had to remove bed braces. Now the front of the bed will lower almost to the ground. The back is getting ...

On the original hood the mount location it completely rotted out. Found a good hood braces on this hood at a junk yard. Got the a hood,seat,trim and a few other small pieces for $75 bucks. [URL=http://s1174.photobucket.com/user/jyehsreh/media/4F354434-5B06-4FC7-811F-FC8DBBF41FDF_zpsu65qd1pp.jpg.html...

[URL=http://s1174.photobucket.com/user/ ... .jpg[/img][/url]

[URL=http://s1174.photobucket.com/user/jyehsreh/media/20C166E9-FC02-4130-8B0F-D60C1CCCC63D_zpsp71rythh.jpg.html][img]http://i1174.photobucket.com/albums/r608/jyehsreh/20C166E9-FC02-4130-8B0F-D60C1CCCC63D_zpsp71rythh.jpg[/img] [/url] [URL=http://s1174.photobucket.com/user/jyehsreh/media/A0C08E2C-8FA...

[img][/img]

Started putting the bed down today. Seeing exactly what needed cut. The plan is to make a frame on top of the bed floor, then cover it with sheet metal. A Custom bed cover to hide the bed. I'm going to use some of the f100 frame to make mounts for the front of the bed.

[URL=http://s1174.photobucket.com/user/ ... .jpg[/img][/url]

I wanted to reuse the crown vic body mount pads but the f100 mounts holes are to small. Ended up getting a 10-45 mm step drill bit. Then drilled them to fit the crown vic rubber pads. The truck is dropped 5 inches from stock with it setting on the mounts and pads. Picked up the steel today for mount...

[URL=http://s1174.photobucket.com/user/ ... .jpg[/img][/url]

I made some side mirror holders. My wife likes them but I'm not so sure yet. [URL=http://s1174.photobucket.com/user/jyehsreh/media/3DE57A06-81D1-41DE-9C17-4757B8898155_zpsplj73hn2.jpg.html][img]http://i1174.photobucket.com/albums/r608/jyehsreh/3DE57A06-81D1-41DE-9C17-4757B8898155_zpsplj73hn2.jpg[/im...

[URL=http://s1174.photobucket.com/user/ ... .jpg[/img][/url]

I cut the old truck mounts from the f100 frame and welded them to the CV frame. I just welded them on where I could reach easily until I lift the body off to finish welding them. [URL=http://s1174.photobucket.com/user/jyehsreh/media/8681ADE3-C0B1-4C4E-9507-296A4550B6A6_zpsif6khr61.jpg.html][img]http...

No. It gets a peroxide wash after then after a few days it sets in the sun and rain. I'll do that until it's cleaned up before it gets clear coated.

Weekend plan is to get the cab rear mounts welded to the frame. I pulled the f100 rear cab mounts off and plan on using them. They look like they will fit nice.

Rear of truck. And dissolve a little salt in the vinegar
[URL=http://s1174.photobucket.com/user/ ... .jpg[/img][/url]

I'm missing bumpers so I went with a rear roll pan. Only problem was it wasn't Patina. I found a way to quickly rust plain metal. A quick vinegar bath 5 minutes or so the spray on hydrogen peroxide. The rust forms nearly instantly. I continued then peroxide spray a couple times a day for 5 days. It'...

Frame just after removing the cv body.

[URL=http://s1174.photobucket.com/user/ ... .jpg[/img][/url]

Crown Vic dash back wiring harness.

[URL=http://s1174.photobucket.com/user/ ... .jpg[/img][/url]