Search found 20 matches
- January 14, 2011, 10:55 pm
- Forum: Truck Talk
- Topic: Trans Swap! Speedometer Question??
- Replies: 0
- Views: 287
Trans Swap! Speedometer Question??
Hey All, Finally getting everything together for my T-5 Swap into my 61! I have been wanting do do this for a while. I have all the information with one exception. Speedometer issues with the newer T-5 to my Speedometer?? Anyone already dealt with this issue? I want to get everything ready and get i...
- October 7, 2010, 1:58 pm
- Forum: Truck Talk
- Topic: T-5 Trans Options and Install?
- Replies: 14
- Views: 2308
T-5 behind my 223!
Thanks for all the input. It is appreciated. I realized yesterday that I may as well go with a WC T-5 with the tailshaft modification from Modern Driveline. That way if or when the 223 fails (hopefully not anytime soon). I can just bolt it up to a modern fuel injected 5.0. It's going to get expensiv...
- October 6, 2010, 12:59 pm
- Forum: Truck Talk
- Topic: T-5 Trans Options and Install?
- Replies: 14
- Views: 2308
T-5 Trans Options and Install?
Hey All, I have been checking on all of the different options of a T-5 install behind the 223 in my 61 F100. I recently drove it from South Carolina to Houston, Texas. Ran great! Averaged 14 to 15 mpg. But, I was doing about 55 mph the whole time. Kinda dangerous on todays highways! I read something...
- May 16, 2010, 10:51 pm
- Forum: Projects & Builds
- Topic: kstones63 project
- Replies: 250
- Views: 80283
Damn!
Nice job! You going to show locally and maybe nationally?
- May 16, 2010, 10:42 pm
- Forum: Truck Talk
- Topic: Timing on a 61 F100 with a 223?
- Replies: 4
- Views: 648
Thanks!
Found the marks. Buried in a bit of corrosion. Thanks for the help guys!!! Have a good one!
- May 13, 2010, 10:15 pm
- Forum: Truck Talk
- Topic: Timing on a 61 F100 with a 223?
- Replies: 4
- Views: 648
Timing on a 61 F100 with a 223?
Hey All, I have a 61 F100 with the 223 in it. I am trying to time the thing. I have a what looks to be a chalk mark on one part of the Crank pulley. I have an indentation that looks like a Chisel put it there on a different part of the pulley. No graduated marks at all. Can anyone give me some advic...
- May 1, 2010, 11:54 pm
- Forum: Projects & Builds
- Topic: my rusty roof story
- Replies: 29
- Views: 5564
Damn Good Job!
Wish I had your skills!!!
- December 13, 2009, 10:22 am
- Forum: Southeast Region
- Topic: Hello from the Ukraine. I fly to home to SC soon!!
- Replies: 2
- Views: 1653
Hello from the Ukraine. I fly to home to SC soon!!
Are there any Slick fans in South Carolina??
- June 29, 2009, 11:52 am
- Forum: Truck Talk
- Topic: One Barrel Carb!!!
- Replies: 5
- Views: 626
One Barrel Carb!!!
Hey All! I am about to replace the 1 barrel Holley that came with my 61 F100. Any suggestions on what to replace it with? I want another 1 barrel carb. I have looked around the internet. haven't seen much on quality new 1 barrels??? Any suggestions are appreciated! Thanks!!!
- June 12, 2009, 2:33 pm
- Forum: Off Subject
- Topic: very nice 66.....how much will it bring ?
- Replies: 21
- Views: 4418
Fuel Tank!
Correct me if I am wrong?? I have only owned a 66 and 61. Both pretty original. The fuel tank was always silver. Never the color of the cab interior! Yes or no? I definitely think the truck has been restored! Still a very nice truck though!!!!!!
- June 11, 2009, 9:26 am
- Forum: Truck Talk
- Topic: 61 F100 won't start?
- Replies: 9
- Views: 966
I Agree!
I agree with Iceman. I didn' tear anything down. Just removed the timing cover. However, given the trucks age. I didn't hurt to replace the things that I did.
Heading to Kuwait then Iraq. I will finish her up when I get back!
Heading to Kuwait then Iraq. I will finish her up when I get back!
- June 10, 2009, 7:34 am
- Forum: Truck Talk
- Topic: 61 F100 won't start?
- Replies: 9
- Views: 966
61 Not Starting!
Hey All, Got her running yesterday. While double checking that I had the new coil hooked up correctly (Thanks R Pope). I discovered the negative wire running from the distributor to the coil was half way broken. Cuasing the weak spark. Fixed that and it fired right up! Thanks for the input. y'all ha...
- June 8, 2009, 7:32 pm
- Forum: Truck Talk
- Topic: 61 F100 won't start?
- Replies: 9
- Views: 966
61 F100 won't start?
Hey All, Here is my status. !961 F100, 223 6 cylinder, 87,000 original miles. Drove it to and from the gas station (5 miles) about 4 months ago. Turned it off and it would not start. I have replaced everything from the cap, rotor, plugs, wires, voltage regulator, coil, condensor, points. Plus a top ...
- December 16, 2008, 12:02 pm
- Forum: Truck Talk
- Topic: Manual Disc Brake Kits?
- Replies: 4
- Views: 688
Thanks Fred!
I was looking at that company. I appreciate the info on the rear brake kit as well.
Thanks Again!
Rick
Thanks Again!
Rick
- December 15, 2008, 10:52 pm
- Forum: Truck Talk
- Topic: Manual Disc Brake Kits?
- Replies: 4
- Views: 688
Manual Disc Brake Kits?
Hope everyone is warm back in the States. It's cold here in the "Arctic Circle" (RUSSIA). I need some information from you experienced Slick 60s fans!!! Which company makes the best Manual Disc Brake Kit for a 61 stepside?? What is the difference between the rear brakes on a 61 and 66?? I ...
- December 1, 2008, 12:49 pm
- Forum: Truck Talk
- Topic: Prebent Fuel Lines?
- Replies: 2
- Views: 454
Prebent Fuel Lines?
Hey All,
Does anyone know of a company that sells prebent/fabricated (tank to frame) fuel lines for a 1961 F100. I would also like to buy a new tank. If I can't find a new tank. I will seal this one like I did my 66 Custom Cab. Any and all help is appreciated!
Does anyone know of a company that sells prebent/fabricated (tank to frame) fuel lines for a 1961 F100. I would also like to buy a new tank. If I can't find a new tank. I will seal this one like I did my 66 Custom Cab. Any and all help is appreciated!
- October 7, 2008, 11:54 pm
- Forum: Truck Talk
- Topic: 1 Wire Alternator/ Bench Seat Uhpolstery?
- Replies: 8
- Views: 2554
Thanks For The Input!!
I appreciate all of the advice/ replies to my questions. I am trying to order all of my parts from Russia. I will assemble when I get back to the U.S.! Thanks again!
Rick
Rick
- October 5, 2008, 7:32 pm
- Forum: Truck Talk
- Topic: 1 Wire Alternator/ Bench Seat Uhpolstery?
- Replies: 8
- Views: 2554
1 Wire Alternator/ Bench Seat Uhpolstery?
Hey All, does anyone know of a reputable place that sells a high output 1 wire alternator that will fit my 61 F100 with a 223 inline six? I have also been all over the web looking for a seat cover like the one I had in my 66 years ago. Teal/ turquoise blue with a gear and lightning bolt on it. Anybo...
- September 22, 2008, 2:08 am
- Forum: Truck Talk
- Topic: Super clean ebay 61
- Replies: 12
- Views: 1790
That's A Nice Truck:)
I haven't seen it personally. But, I bought it off of E-Bay while working in the "Arctic Circle" in Russia! Working on NABORS Rig 536. My brother (picked it up) swears it is in great shape! I'll keep all posted on how she turns out!
- September 22, 2008, 1:41 am
- Forum: Truck Talk
- Topic: Upgrades On My 15 yo Daughters 61 F100 Stepside
- Replies: 4
- Views: 818
Upgrades On My 15 yo Daughters 61 F100 Stepside
Hey All, I know most of what I am about to ask has been covered on this Forum! I recently bought my 15 year Bolt.gif old her first vehicle. It is a 61 F100. i need to put 4 wheel disc all around, T5 conversion and power assist (she will be a 16 yo girl when she starts driving it)! Any vendors or ide...
