Cut a ton outta mine, scribe a straight line down the length of the column to give you a reference as to TIG weld it back together. Just making the column shorter is not gonna do it for you... You need to raise it and change the angle as well. Best thing to do is put a aftermarket tilt column in, do...

If your interested in an aftermarket disc brake kit and re-drilled 5-4.5" axles I do have this stuff available. PM me if your interested.
Russ

http://us.ppgrefinish.com/PPG-Refinish/Product-Annoucements/Ditzler-Hot-Rod-Black-Kit Best stuff I used yet, a bit pricey but durable. You get what you pay for, this is actually a urethane top coat. Wizzards sells a great detail spray to clean the bug guts off... http://www.wizardsproducts.com/stor...

I got one from the dealer a few years ago, think it was around 80 bucks.

Yes it is Paul, made out of 5/8" MDF and covered with carbon fiber wrap.
Thanks,
Russ

I built pods out of fiberglass and ported them thru the kick panel into the cowl using a 2.5" port. I'm using time correction via D.S.P. you can't tell where they are, you can't tell they're in the kicks. And yes you can hear them thru the cowl vent, kinda muffled though... I picked this area o...

You guys are doing a great job Skip!! Nice work!

[quoteloosrp wrote: Very nice build! Was wondering, what determines the application of the K36 or Slick Sand? K36 a urethane primer? Thanks, Russ Russ, we use Slick Sand on outside panels that need to be absolutely straight. It builds very thick so we can long-block the panels flat with 80 grit. We ...

Very nice build! Was wondering, what determines the application of the K36 or Slick Sand? K36 a urethane primer?
Thanks,
Russ

Yuppers, that's the way you wanna do it. Just an FYI you can use an aerosol type glass cleaner for your lube. I put my headliner in after the fact, its a real pain getting it tucked under the rubber but doable.
Russ

Awesome work!!

Like Skip said, 12+

Here you go Skip, I also used the EZ Wire Harness


Hope this helps!
Russ

Call these guys
http://www.doetsch-shocks.com/contact.asp

Also, if you need a pin out diagram of the headlight switch I
Think I may still have a diagram

Here is a link to the tread I referred to

http://www.slick60s.com/viewtopic.php?f=1&t=12064

Your welcome, there is a discussion on this truck here somewhere, I think Michelle had some input as well.

This is a 64 Ranger that I found here in Ohio a few years ago.. http://i906.photobucket.com/albums/ac268/loosrp/100_0776.jpg http://i906.photobucket.com/albums/ac268/loosrp/100_0780.jpg http://i906.photobucket.com/albums/ac268/loosrp/100_0782.jpg Vin is posted above

Maybe this will help, this was the Vin tag on a 64 Ranger I found a few years ago

No one sells a complete bolt on kit that I could find, look up some of my old posts and you can see how I did mine, you'll need a TIG to do the pitman arm.

15W40 Rotella is the best oil for flat tappet motors, been using it for several years... Never any issues