6166 Junkyard Dog wrote:lets see if I put enough zeros in 2,500,000 to 3,500,000 dollars for everything in the pic truck/trailer/cars/slick in trailer

Not even close. One of the cars on the trailer sold at pebble beach back in 2011 for $2.6M.

looks like motorcraft fl-20.

1962 F250 with the front Dana 44HD. Where to buy the felt seal kit at a reasonable price. Other question is what weight oil inside the knuckle? Manual says 90 like the axle but seems too thin. Saw some guys running 140, heard about some running grease. Thanks, Goob.

Thanks for the replies! Rich, I was aware of the small pattern 4 bbl manifold, block is C2AE-C, heads C1TE. Brian, I'll see if I can find a number on that 90 oil filter adapter. John, thanks for the heads up on the pulley. Dennis Carpenter is 10 minutes away. This one? http://dennis-carpenter.com/cr...

Picked up this '62 292 off craigslist in Macon, Ga. It has been sitting inside a box truck for a couple years. Haven't opened it up yet but it has new gaskets, paint, inside the ports looks great, pistons look new, 4 bbl "A" manifold. Was hoping someone here could give me some history. Tha...

Gritsngumbo wrote:Just curious, which are you seeking?

Looking for a nice tailgate for a long wrong bed.

Will the same tailgate fit both beds? Thanks.

Best I can measure center to center 2.96".

Stud measuring 0.433" on the threads, 0.44" on the smooth.

Hope that helps. Show us some pictures.

Not the best picture. Looks like 2 & 15/16". Be able to get more accurate tomorrow if you need.

hope you find what you're looking for. 1953, too much of a project? http://helena.craigslist.org/cto/5102610903.html 1953, runs and drives just cant stop. http://kalispell.craigslist.org/cto/5061788245.html is the next body style a deal breaker? http://albuquerque.craigslist.org/cto/5073925401.html ...

Four wheel drive is a different critter on the switch from the others . Rich The part from Carpenters will not work for the four wheel drives. I bought one and will just drop it off next time I go past there. One that came out on left. Pieces of the cam had broken off letting it slip down to left t...

First question is the year and series of the truck. The early switch is the same as Falcon/Comet, making it a little easier to source a quality replacement, as well as to repair if you choose. Paul Thanks for all the replies. I should have said truck is 62 F250 4x4. See carpenters sells this, they'...

When my truck hits a bump in the road the turn signal lever falls down to the left turn position. What is wrong, what parts do I need, where to buy them and any tips on the repair? Thanks again.

62 f250 with the 292. Temp gauge reading ~130 degrees after warmed up. Have a 180 degree thermostat in there. Heat works. Is there a way to test the one wire sensor or just buy one and replace it and go from there? Is there a way to test the gauge to make sure it is working correctly? Thanks. new se...

Ford Official: We Will Not Drop V8

http://www.carscoops.com/2015/01/ford-o ... -from.html

I have owned chippewa, danner and redwing. I check to make sure they are made in the USA. Here's one place to look:

http://www.redwingsafety.com/safety-boo ... ade-in-usa

i never saw them for sale, been a while since i looked. price is not out of the question provided they are USA made, otherwise i would not bother buying. we have a member who sells replacement metal, as well as other new parts, i only buy from him. i have a wire feed welder so installing is not an ...

So, the motor is rebuilt, the 6V setup (tri-power, 3x2, etc) is on and running (holy crap it's been a year!). I need pics of the factory throttle return spring. Mine didn't come with one and I'm at a loss how to add one.. any help would be appreciated -Thanx in advance! You know we like pictures of...

Chris, I have them on a 352 however it is in a 4x4. Have not seen them on a 2wd. If you need pics let me know. Hugh I would appreciate photo. Thanks Sorry for the delay but here you go: http://i1125.photobucket.com/albums/l590/goggenile/driverexman_zps0dff907c.jpg http://i1125.photobucket.com/album...

I have not seen one yet Chris.

High-Impact lists one but no pics/price. http://www.high-impact.net/zf_5&6spd.htm

Bendtsen's may have something. http://www.transmissionadapters.com/Pricing.htm

There's advance adapters as well.

Good luck and show us how!