done project an d have two part trucks worth of items let me know what you need before at goes to the scrap yard. may also be going to ford national in Carlisle.

The trucks never came with them. Sorry.

$50 for the pair

the only clean one that I have are the ones in the pic. the top box of them doesn't have a speck of rust, or swelled up like most. but as you can see someone cut notches in the bottoms. I have one of the pieces from the cut out that could be welded back in. I'm located just outside of Ocean City.

the yellow bed has no bottom, and the green bed has a floor, and decent head board.

$250 for the pair. I never had to ship anything cross country, so I will look up how to do it.
Thanks Nick

Finished my build, and have two part trucks, have matching drivers door for the single passenger in the picture. many extra parts, interior/ exterior. Let me know what you need. The inner fenders and the green drivers fender are sold, everything else is still for sale. 12400 12399 12398 12395 12396 ...

i put a vinyl mat from macs in my truck, and it is quite nice. it is thick and durable, but your right about it needing a lot of trimming. it was easy to put in, all i needed was a heat gun just to push the corners in by the transmission hump. But it was the only one that i could find that went from...

its an Oliver 70

thank you. I finally get to use the truck after 2 years of working on it and your welcome.

this past week we went down to the field and began picking some corn with our antique farm equipment (1950s).

thanks, it's painted Wimbledon white, and blue metallic

this week i made some progress on my truck, and is now finally coming back together. my father helped by painting the cab and the bed. 11559 11560 11557 11556 11555 11563 few pictures of our painting booth setup. just nailed plastic around, and place a fan at one end to suck the fumes away. its simp...

thanks, I never noticed the hole before, and I never saw anything bolt there when I looked at other trucks.

Thanks, I will just wait until I put the whole front clip on, to align the cab on the frame.

The bodywork on the fenders is finished, cause someone sideswiped something and put a huge crease in it. So my dad and I tested fitted the fenders, and while doing so I noticed a bolt hole located behind the fender, and on top of the fresh air duct, just below the cowl. Never noticed it before, but ...

Thanks for the idea, I am finishing working on the bed (weather permitting) the whole driver side of the bed was caved in, and was beat back out with a ball peen hammer. So my dad and I had to shrink the metal. Now the side of the bed is roughed in, and painted in epoxy, so it will be no problem pla...

I'm getting ready to bolt my cab down, and I was wondering the best way of lining the cab up onto the frame.

Thanks

thanks every one for clearing that up for me, and by the way i up dated more pictures in my album if any one was interested at looking at them. thanks again

i tried placing the switch into the hole, but the hole is a hair to small, and the hole is perfectly round, while the switch has one flat side.