looking for a used harness for 63 single gage

Thanks for your comments everything will work out. My other half made the mistake of reminding me I always wanted an in ground home fits the budget and can do it on the same property. In about a year I should have it done, may take pictures then.

been gone for awhile had a problem with the house it burnt down. decided I need some short breaks from building I managed to keep the 63 project it will be a good break. I will be in need of parts in time maybe in a month I will be looking for a wire harness for the engine compartment and under dash...

Don't know what it is like in your area but I have found most of them in rural areas.

Alright it will be another week before I can get to it. I appreciate any help with this thanks again.

Ok here is the problem I don't know wiring at all and am trying to start a 292 in a 63. I don't have a key for the ignition so I am using a wire to jump the back of the ignition ( battery to ignition post ) and then touching ignition to center post on back of ignition switch. At the solenoid I have ...

I no this may be the wrong area to post but some of us use newer motors. I have a 93 straight 6 with a 5 speed standard run all the time but shutters at times at any speed. I understand this is a common problem but no one seems to have pinpointed the problem. My fuel supply is good plugs fine, distr...

Yea I know what you mean the cone shape on this ring is not an insert it is part of the ring.

OK I have given up on my search to find out what I have. I have a four spoke horn ring from a 1964 F350 but where the Ford should be in the center it is a cone shape like the tip of a bullet. I have searched and can not find one on the internet. I can't post pictures on this site but can send by Ema...

I thought about the Tremite and the rental fee was not bad but I would have to rent it several times, could add up to the price of a used hoe. I also looked the 300.9 cat on line the measurments and weight would work but I am having a hard time beliving the size I have to see one it sounds like the ...

Has anyone used a towable backhoe? I have some work around here nothing heavy but cannot use a compact tractor. Looking to find out how well they work I no they will not work as well as a standard machine but thought it would beat a shovel. Any information would help.

I will be using the tumblers (cylinders) from the doors of a 64 and the ignition from the 63. The locksmith said he would change all to 1 key for about $35.00. I figure it is about the same as new without shipping and keeps the money in the area.

Thank you

Don't have any keys for the truck and can't remember if these trucks had 2 keys or 1 it is a 63 f100. can anyone tell me.

I have the 4 spoke wheel if someone is interested it came out of a 64 F350 The horn ring is different.

Speed channel

Don't know when the program was made but showed a slick someone did as a project.

Someone correct me if I am wrong but if I remember a backfire through the exhaust is a carb problem and a backfire through the carb is timing.

Thanks that the one I wanted.

I am trying to do a small project and would like to use the slick 60's logo I am not selling this project. I also would like to use the grill pictures on this site but can't find them it was the simple one with the 61-66 black and white pictures Can someone lead me in the right direction.