Loom for the blue Durango with an orange popup lol

Anyone headed this way we are located on block 64.
Come in the vendor gate drive past the showers and turn left.
We are down almost past the score board

Doesnt look like the pics are posting. If you need a pic or direction text me at 469 twotwothree six573

See you there

Skip great job on the lights My lenses must have been from a different manufacture because the top part of the last 3 sets of shield lenses i have had, have had the reflector square pattern on the top part instead of the Fresnel lens type diffuse it has on the bottom (light went through top but was ...

so how are you getting around the reflectors built into the top of the lenses are casting your own ??

last time i tried a led behind a reflector it did not work.

Love mine. No problems with install just make sure to get the v8 dak springs.
I don't know if the new kit offers a 5x5.5 pattern but i used 90 dodge truck brakes
to get the 5x5.5 on all four corners.

Hey Skip I have a space I might part with.
What's this about a bed you might part with? how much and do you have pics?
Wanna Trade?
but willing to share space as I don't have much of anything to sale this year

Chris you know if you need to use my truck use it.
just remember the rule "you break it you fix it"
she ain't doing me a bit of good right now when i ain't
never home

p.s. if you do go hunting for parts let me know iffin you see a spare
tire rear fender

Top This One For A Speeding Ticket Two Highway Patrol Officers were conducting speeding enforcement on I-15, just north of Oceanside , San Diego , California ... One of the officers was using a hand held radar device to check speeding vehicles approaching the crest of a hill. The officers were sudde...

Definitely no connection between number of post and completeness of projects. If there was I would have a show quality truck by now



of course if i every had time to work on it I might be further along

Hey Brian Me, PFM and others are always out at Pate in april and Pfm almost always makes it out to the Good Guys show at TMS in the fall as for parts trucks you just have to look around and see what you find The are a few floating around in the DFW area. Pfm and me have gone in together on parts tru...

I'll try to answer some of these for you By the code scanner port I am guessing you are referring to the 83-93 self test connector if so i just have it laying in the glove box right now. Along with the computer and the relays. I plan to get it all mounted inside the glove box eventually. For the fue...

grw I did the bronco II tank mod to mine and did not have any issues (of course i did not have a floor in my bed at the time or a spare tire mount ) and it installs basically the same as the mustang but with a side filler that goes right over the frame rail under the bed. The only issue i could see ...

Well other then a light mist Fri afternoon the weather has been holding off during the day for Pate. Cloudy warm and muggy weather

4 Hrs Yanked the 351M from my previous slick swapped everything over to a rebuilt long block and back on the road.

Since the cab Vin is on the drivers door swap every thing but the drivers door. Or you could chance a Federal Violation and swap the Vin plates off the doors too. I think the rivets for the Vin plate are available (not recommending this route just saying)

You need the hub/rotor from a 85-92 ram
calipers for the ram were the same from the 78 to 92 for sure. as far as caliper brackets I have the brackets from a 85-89 but brackets up
to a 92 should fit? and possibly brackets as early as 78 might work

You might want to reconsider those switches I know for a fact that with the saturn window conversion there is not enough room between the window motor and the door for a switch. At least on my 63 there is not. So unless you plan on relocating the window handle you might want to mock the conversion u...

For anyone who has the Dakota front end I have found factory bolt on parts to get the proper 5 X 5.5 wheel lug pattern. Here is what I have found Rotors off a 85-92 dodge ram fit properly using the same bearings as the Dakota rotors , rotors from pre 85 have a different outer bearing. the rotors fro...

the nuts/clips for the fenders are called U or J nuts
I get them and new bolts from Northland Fasteners
http://northlandfasteners.biz/Store/ind ... 173_42_196