Search found 17 matches
- August 16, 2018, 2:58 am
- Forum: Truck Talk
- Topic: 351W in a 65 F100
- Replies: 13
- Views: 3234
Re: 351W in a 65 F100
Well at long last the beast made it madin voyage and I must say it was surprising. Got tired of using gas cans to put gas in so was just going to run over to the QT around the corner and give it it's first full tank in who knows how long. Not exactly sure what happened but it ended up being a 47 mil...
- July 28, 2018, 9:42 pm
- Forum: Truck Talk
- Topic: Got the 351-W in tonight
- Replies: 10
- Views: 2142
Re: Got the 351-W in tonight
Used shorty headers from a 94 5.0 Mustang on my 65, they fit real nice.
- June 2, 2018, 4:42 pm
- Forum: Truck Talk
- Topic: 351W in a 65 F100
- Replies: 13
- Views: 3234
Re: 351W in a 65 F100
Well I see it has almost been a year since I last updated the build. So I did swap over to the lowering beams in front, and added disc brakes, new springs front and rear, swapped the rear axle to one from a 75 F150 and added a Trac loc carrier with 3:25 gears, looks much better with matching wheel t...
- August 27, 2017, 7:59 pm
- Forum: Truck Talk
- Topic: Rear sump oil pan in a 66
- Replies: 4
- Views: 791
Re: Rear sump oil pan in a 66
Using a rear sump truck pan on the 351W in my 65 no clearance issues at all.
- August 6, 2017, 7:12 pm
- Forum: Truck Talk
- Topic: 351w pulley problems reviseted
- Replies: 12
- Views: 1459
Re: 351w pulley problems reviseted
Something else to consider is Ford has 2 different snout lengths on the small block water pumps. When I was setting up the small block in my 64 Ranchero I was lucky enough to get everything, pulleys, accessory brackets, etc off a 1985 E150 with a 351W. I seem to recall having to swap the water pump ...
- July 29, 2017, 3:42 am
- Forum: Truck Talk
- Topic: 351W in a 65 F100
- Replies: 13
- Views: 3234
Re: 351W in a 65 F100
Guess it's time for a progress update. Have new springs with 2 inch lowering shackles in back, went with the 3 inch lowering dream beams in front and new springs there also, disc brakes, new king pins, bushings, rotors, calipers, etc. While climbing around I discovered the steering box wasn't tight ...
- July 6, 2017, 2:53 am
- Forum: Truck Talk
- Topic: 351W in a 65 F100
- Replies: 13
- Views: 3234
Re: 351W in a 65 F100
My original plan was to drop it, I already have a set of 3" drop Dream Beams for the front. I am hoping to get the new rear springs put in this weekend with some 2" drop shackles so I can see how it sits in the rear. If it levels it out then I will leave the stock I beams up front. I want ...
- July 3, 2017, 10:45 pm
- Forum: Truck Talk
- Topic: 351W in a 65 F100
- Replies: 13
- Views: 3234
Re: 351W in a 65 F100
Well it was a good weekend, managed to take 3 dash harnesses and build 1 good harness, figured the turn signal switch wiring out to use the T-bird column and signal switch and have 4 ways that work through the switch on the column, and best of all have the 351 running. Sounds sweet with 2 1/2 inch p...
- July 3, 2017, 10:32 pm
- Forum: Truck Talk
- Topic: Power steering hoses
- Replies: 2
- Views: 747
Re: Power steering hoses
On my 76 box it's a 5/16 inverted flare on the pressure side and 3/8 inverted on the return side.
- July 3, 2017, 10:29 pm
- Forum: Truck Talk
- Topic: Ignition Switch Issue
- Replies: 9
- Views: 1251
Re: Ignition Switch Issue
I have run into the same issue, seems if I push on the back of the switch so the lock cylinder is slightly forward in the bezel it turns free. Going to try a different ignition switch, didn't have this issue with the old switch.
- June 27, 2017, 3:46 pm
- Forum: Truck Talk
- Topic: 302 engine perches
- Replies: 9
- Views: 1635
Re: 302 engine perches
I just used the 6 shooter towers and moved them back to the rear set of mount holes.
- June 24, 2017, 5:51 pm
- Forum: Truck Talk
- Topic: 351W in a 65 F100
- Replies: 13
- Views: 3234
Re: 351W in a 65 F100
Yea the Fox Body Mustang headers seem to fit the best unless your running a manual transmission then it would be necessary to use a hydraulic clutch setup. I am using a power steering box out of a 77 F150 and have plenty of room. Just finished fitting up a tilt column. Just had to be different, I'm ...
- June 21, 2017, 3:24 am
- Forum: Truck Talk
- Topic: windshield opening
- Replies: 4
- Views: 1118
Re: windshield opening
Mine is right at 20 1/2 on both sides.
- May 29, 2017, 6:10 pm
- Forum: Truck Talk
- Topic: 351W in a 65 F100
- Replies: 13
- Views: 3234
Re: 351W in a 65 F100
I didn't think there was a difference in the flex plates but I found out different. The C6/AODE flexplate puts the torque convertor in a bind in the pump. Get a 164 tooth flex plate for a pre 1981 302 and everything will bolt right up.
- May 28, 2017, 9:16 pm
- Forum: Truck Talk
- Topic: 351W in a 65 F100
- Replies: 13
- Views: 3234
351W in a 65 F100
Well getting around to working on my 65. I am restoring it to use to pull a vintage travel trailer so I decided on a 351W backed with an AOD figuring the AOD would work nice with the stock 3:98 gears in the rear end. Found out Ford apparently never put the early AOD behind a 351 and the flexplate fo...
- August 29, 2015, 3:14 am
- Forum: Truck Talk
- Topic: Needs a home.
- Replies: 0
- Views: 837
Needs a home.
Hey all: Not sure exactly where to post this but since this is the part of the forum I always head to first when I visit figured it's the best place. I recently rescued a 66 F350 from a wrecking yard I have been dealing with for years, the owner retired and closed the place down. Fortunatly any old ...
- March 4, 2015, 4:04 am
- Forum: Truck Talk
- Topic: New '65 Flareside owner
- Replies: 37
- Views: 1764
Re: New '65 Flareside owner
Well it looks like it's been 2 years since this post was started and was curious how the Slick is coming along. I have recently become the proud owner of a former Air Force version of your Slick actually this will be the second time I have owned it. When it was first aquire it had the 240 3 on the t...