Cory.
I have the hlvp set up and I don't have any problems using line pressure at the regulator at the gun. I think you have a faulty pressure regulator at the gun.

Whitey. Sorry to hear of your problems. My take on your problems are the ready to run dizzy. Like anything electronic it is always prone to fail when least expected. I hope MSD will help you resolve this issue. I have used MSD products for many years and have had only one failure with a 6AL box but ...

skidoorulz I've never heard of using ammonia in the water. I use straight water and it works quite well. Be sure to let the headliner soak up well so it is flexable. I use a spray bottle and it may take a couple of applications before it is wet enough. I'm not sure where the clips go as its been a w...

I can't remember ford using them on any of their engine family's. Ford doesn't put that much oil to the rocker arms.

Oregoon I use a 12 volt dry coil from a fuel injected engine. They rarely fail and produce a hotter spark. Whenever I am in a salvage yard I snag a couple of them. I use them with the stock Dura Spark system and with a MSD box. One of the best ignition up grade you can do. Just make sure you hook it...

Max
Go to the uni build and check out how we ran the exhaust outside the frame rail. When its done that way it eleminates going over the axle inside the frame. There is more room there than one would think.

I hope you took lots of dimentions of the cab mounts because I have yet to see anyone selling a cab mount that will actually fit. The drivers side is longer than the passenger side and they don't fit straight across. Some one on here, quite a while ago, made some drawings with dimentions that fit pr...

Pertronix is a good system and I have used their points replacement with good results BUT. The ignition system I use is the dura spark system with a couple of modifications. The duraspark distributer is very reliable and accurate. It is the only part I use of the duraspark system. I use a dry coil f...

Need help identifying the manifolds. I am aware that there is a rams horn that fits the larger truck Y block and is there a set that fits the smaller Y block. Part numbers or casting number would help. I don't have any pictures yet as we just found them yesterday and I didn't have my camera with me.

Great picture Mark. Long time not hearing from you. Hows the family doing? How are you? Been working a lot? Any chance we might see you all this summer?

A video of the first "for me" single door glass install. What a chore.

Here we go the long awaited "one piece door glass install" We hauled out the KIT and read through the instructions for the ???? who knows how many times. Looked at the crappy black and white pictures on plain paper with felt pen notes and arrows. Got out some measurement tools the soap sto...

But...... Isn't customising fun. Measure and plan till you go blind and, get everything situated just like you want it and CRAP how did I miss that. We had to redo the console in our truck 3 times befor we got it right and now it has to be painted again. Had to re-do the upper valence twice, had pai...

The truck saw the light of day under its own power today. I'll let the video speak for it's self.

Ok more progress. We have started the wiring and will be hiding the wiring so it won't be seen in the engine bay. Got paint on the inner fenders, core support, and the fenders edged and got them hung today. All in all we are making some good progress in the last few days. Here's some pictures. http:...

We have made a lot of progress but, like Uncle Skip, most of it doesn't show. Today we got the headliner from Dennis Carpenter installed. It fits very well. It needs to be pretty well soaked with water so it can bend without breaking. Got the cab interior dyna matted and it's pretty quiet inside the...

Greg.
Just measured the one in the shop and it varied between 3/8 to 1/2 inch. I doubt there is any difference between non trim and trim versions.

Moving along on the hood scoop project. Beginnng to tack things together. http://imageshack.us/a/img585/2428/dscn0010cm.jpg http://imageshack.us/a/img89/1286/dscn0009a.jpg http://imageshack.us/a/img209/7605/dscn0008b.jpg http://imageshack.us/a/img14/8769/dscn0007zq.jpg http://imageshack.us/a/img837/...

Put stuff in the cab to see what it looks like. It's GREEN. Fixed a couple of issues with the new lower valence and got started on the hood scoop. http://imageshack.us/a/img9/572/dscn1131ui.jpg http://imageshack.us/a/img546/8899/dscn1124t.jpg http://imageshack.us/a/img5/3632/dscn1133e.jpg http://ima...

The vent cable holes have chrome caps. We would have removed the drip rails had there been any damage to them or the top. The hood scoop is presenting some challanges but that is how it is with custom work. I think I have it worked out. I'll start on it in a few days. We scored a big truck lower val...