64 F100 Fuse Panel - Help

Gritsngumbo · Post by **Gritsngumbo** » August 20, 2007, 10:38 am

I need help! Checking over my 64 yesterday prior to taking it in for interior paint and discovered that my headlights and turn signals are working, but all other lights are not. (They were working when I had it inspected at the first of the month). I'm assuming that a fuse is blown.

I have taken the light switch out to gain access to the fuse panel, but I can't figure out which fuse is which. Anyone have a photo or a diagram of the fuse panel? My operators manual shows under OTHER LIGHTS: Instruments, Dome, Parking, and Rear) 2 amp. The others (except the headlights) show a fuse number.

Or can anyone help me identify the 2 amp fuse (?) so I can replace it and get it to the paint shop?

Thanks in advance for any assistance.

GLindley · Post by **GLindley** » August 20, 2007, 11:42 am

Here is a scan of the fuse panel taken from my '64 shop manual..

[albumimg]2612[/albumimg]

Gritsngumbo · Post by **Gritsngumbo** » August 20, 2007, 11:56 am

You're a lifesaver. Thanks. (I need to get me a shopo manual)

Gritsngumbo · Post by **Gritsngumbo** » August 20, 2007, 1:33 pm

Gene: That worked, replaced the 15 amp fuse and now I am well lit. The PO had a 30 amp in there and it was blown, so I must have another problem that I'm going to have to address.
Thanks again.

GLindley · Post by **GLindley** » August 20, 2007, 1:36 pm

Glad I could help out! The only thing it will cost you is some grits and gumbo....oh...wait....that's your username!

Gritsngumbo · Post by **Gritsngumbo** » August 20, 2007, 1:50 pm

If you're ever in Monroe, LA I'll fix you up with some G&G. I lived in Springfield for about 3 years in the late 80's. Great place to live and great people.