Hauling a Slick Cab
Hauling a Slick Cab
Anyone know for sure if a Slick cab will fit (sideways) in the box of an '08 Ranger?? :)
I'm guessing not......
If not, then we'll have to use my buddy's F150, or use his car trailer, which seems like overkill
James
I'm guessing not......
If not, then we'll have to use my buddy's F150, or use his car trailer, which seems like overkill
James
Re: Hauling a Slick Cab
Maybe build a trailer out of a truck frame
Put a rear end under the front leafs
Put a tongue on the back & pull it backwards
Put a rear end under the front leafs
Put a tongue on the back & pull it backwards
.
.
.
[b]'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
[b]'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Re: Hauling a Slick Cab
Pat: Sounds like a "Make Work Project" :)
Plus I have none of the ingredients in stock:(
James
Plus I have none of the ingredients in stock:(
James
Re: Hauling a Slick Cab
Yea...
Lot of work for a one time deal....
But if a guy bought & sold on a regular basis....
I'd go trailer, before , in bed of truck
Less chance of damage I would think
Lot of work for a one time deal....
But if a guy bought & sold on a regular basis....
I'd go trailer, before , in bed of truck
Less chance of damage I would think
.
.
.
[b]'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
[b]'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
Re: Hauling a Slick Cab
Sitting on the firewall it might work? Nose down... trailer would be easier.
-
- Posts: 906
- Joined: August 12, 2009, 9:44 am
- Location: Ohio
Re: Hauling a Slick Cab
They barely fit into a standard size bed, so I think the ranger would be too narrow.
-
- Posts: 838
- Joined: August 2, 2014, 10:38 pm
- Location: Mustang, OK
Re: Hauling a Slick Cab
I have a 5'x8' utility trailer that I plan on using to help TR pick up a cab from Pat. We will be building a wooden frame of some sort to put it on.
- unibody madness
- Posts: 2140
- Joined: December 4, 2008, 4:33 pm
- Location: Paradise,CALIFORNIA 95969
Re: Hauling a Slick Cab
Be careful. Short utility trailers can develop a death wobble if towed too fast, or if load weight is two high
Turk build thread at:
viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
Re: Hauling a Slick Cab
Unfortunately a ranger bed is 2.5" to narrow for a slick cab. (even went and measured) My suggestion would be if you want to use the ranger is get some 2x4 and make a frame inside the box for it to sit on above the bed rails.
-
- Posts: 838
- Joined: August 2, 2014, 10:38 pm
- Location: Mustang, OK
Re: Hauling a Slick Cab
My trailer worked great. Had about 1.5" on each side with the cab turned sideways. Used 3 ratchet straps and it rode like a champ at 75 mph all the way back to OKC from Kipp, KS.orangeRcode wrote:I have a 5'x8' utility trailer that I plan on using to help TR pick up a cab from Pat. We will be building a wooden frame of some sort to put it on.
Re: Hauling a Slick Cab
We ended up using my friend Bruce's tandem axle car trailer, loading was no problem, as where we picked it up, he had a tractor with a bail fork on the front:)
The bad news is, he had already moved the cab, with attached front clip several times, and pretty much killed the roof panel:(
In the end, the combined weight was more than I'm equipped to deal with at my place here in the city, so I ended up making multiple trips out to Bruce's acreage with a bunch of tools, and we pretty much harvested anything we could. There wasn't a whole lot of scrap metal to dispose of when we were done....
And if nothing else, it was thoroughly educational learning how the heater assembley, dash switches, hinges, windshield wiper setup, etc all go in there, as well as how the cab was constructed:)
James
The bad news is, he had already moved the cab, with attached front clip several times, and pretty much killed the roof panel:(
In the end, the combined weight was more than I'm equipped to deal with at my place here in the city, so I ended up making multiple trips out to Bruce's acreage with a bunch of tools, and we pretty much harvested anything we could. There wasn't a whole lot of scrap metal to dispose of when we were done....
And if nothing else, it was thoroughly educational learning how the heater assembley, dash switches, hinges, windshield wiper setup, etc all go in there, as well as how the cab was constructed:)
James