Pulling my 352

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Kid, Casey 65

User avatar
Mr. Jones
Posts: 737
Joined: May 7, 2012, 10:43 am
Location: kansas city.

Pulling my 352

Post by Mr. Jones »

It's Sat. 5/20/17 removed radiator,fan,fuel,elec.and motor mounts.Tomorrow flex plate and tranny bolts.Pull lt and start replacing freeze plugs and all gaskets....and paint....stay tuned
Image
Image
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
chris401
Posts: 880
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Pulling my 352

Post by chris401 »

I noticed your Ford C5AE-D pulley. Did your truck come with air conditioning?
Chris
64 f100
Posts: 2754
Joined: July 18, 2006, 7:23 am
Location: Carmi, Illinois, 62821

Re: Pulling my 352

Post by 64 f100 »

I would say that motor is possibly a transplant, notice the riser on the valve cover for the oil fill hole. Also looks like a good time to do a degreasing of the engine compartment. A goo steam cleaning and or pressure wash would do wonders. That motor may not be a 352 and could be anything from a 332 to a 428.
1961 F350
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
chris401
Posts: 880
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Pulling my 352

Post by chris401 »

64 f100 wrote:I would say that motor is possibly a transplant, notice the riser on the valve cover for the oil fill hole. Also looks like a good time to do a degreasing of the engine compartment. A goo steam cleaning and or pressure wash would do wonders. That motor may not be a 352 and could be anything from a 332 to a 428.
I saw that riser. I have seen that on a 534 and they were also on Industrial 428s. They twist on to any valve cover like a regular cap and use a push on housing for the paper element. There were probably other configurations and applications as well.
Chris
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: Pulling my 352

Post by orangeRcode »

Measure it and you will know for sure. Easy enough to do. I pulled my engine last summer and did nearly the same but did pull the heads and have them checked out, installed new cam, lifters, springs, and timing gear & chain. Cleaned out the water passages, replace freeze plugs, water pump, fuel pump, intake and new carb. Good luck on your project.
User avatar
Mr. Jones
Posts: 737
Joined: May 7, 2012, 10:43 am
Location: kansas city.

Re: Pulling my 352

Post by Mr. Jones »

Well it's out,here's that freeze plug
Image

And also found this...

Image

Now the fun begins,clean up,all new seals,freeze plugs and a 475HP paint job

Image
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
chris401
Posts: 880
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Pulling my 352

Post by chris401 »

Don't remember mine cracking long ways like that. I have that manifold in the classifieds. You never did say if you had factory air conditioning or not.
Chris
User avatar
Mr. Jones
Posts: 737
Joined: May 7, 2012, 10:43 am
Location: kansas city.

Re: Pulling my 352

Post by Mr. Jones »

Chris,
Yes the a/c was on truck and it worked.Was a Rotunda unit real nice condition sold it to Toyz at Altoona SlickStock 2014.......A/C on these trucks seems wrong at least to me.I have an extra manifold,thanks for the offer
Dan
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
chris401
Posts: 880
Joined: October 31, 2011, 2:37 pm
Location: Waco, Texas
United States of America

Re: Pulling my 352

Post by chris401 »

Mr. Jones wrote:Chris,
Yes the a/c was on truck and it worked.Was a Rotunda unit real nice condition sold it to Toyz at Altoona SlickStock 2014.......A/C on these trucks seems wrong at least to me.I have an extra manifold,thanks for the offer
Dan
That explains why it had the Ford pulley. The truck ac units I have came with non Ford cast iron pulleys that bolted to the front. Your pulley is better because it has it's own timing marks that don't move when the balancer ruber slips.
Chris
User avatar
Mr. Jones
Posts: 737
Joined: May 7, 2012, 10:43 am
Location: kansas city.

Re: Pulling my 352

Post by Mr. Jones »

Big progress today,three of these.....

Image

= Two valve covers and one exhaust manifold

Image

Only one manifold bolt to go....exhaust stud is in the way,can't get a socket on it....bottle of mapp gas out in the 350....just not motivated to walk out and get it.I'll grab it tomorrow on my way in...

Image

Stay tuned for the next exciting episode of "Pulling my 352"
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: Pulling my 352

Post by orangeRcode »

Moving along. Had 3 broken bolts on my exhaust manifold that I had to extricate. It's a delicate balance of heat and lube. Got 2 of the 3 without drilling.
Andy fox
Posts: 58
Joined: February 11, 2016, 7:45 am
United States of America

Re: Pulling my 352

Post by Andy fox »

Looks good. I've always had bad freeze plugs on the factory motors.

How are you uploading your pics? Mine are to big to upload
User avatar
Mr. Jones
Posts: 737
Joined: May 7, 2012, 10:43 am
Location: kansas city.

Re: Pulling my 352

Post by Mr. Jones »

I have a Photo-Bucket account,installed the app.on this iPhone,pictures upload into PB.Then it's click and paste....not sure about controlling the size.What you see is all done inside the phone or the cloud I certainly didn't do it
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
Andy fox
Posts: 58
Joined: February 11, 2016, 7:45 am
United States of America

Re: Pulling my 352

Post by Andy fox »

Andy fox
Posts: 58
Joined: February 11, 2016, 7:45 am
United States of America

Re: Pulling my 352

Post by Andy fox »

Dang sorry. Tried to upload it but the app only lets me copy the link for it
User avatar
Mr. Jones
Posts: 737
Joined: May 7, 2012, 10:43 am
Location: kansas city.

Re: Pulling my 352

Post by Mr. Jones »

Haven't been able to do much for the last two weeks,been dealing with a summer head and sinus cold..wake up and start blowing my nose,hacking cough,headache and try to work at least till noon, by which time I'd be totally exhausted and go home... sit down and fall asleep.....really sucked.....think those days are over.....worked all day today came home feeling good....
In two weeks this is all I accomplished....
Image
Removed the freeze plugs and cleaned up one side of block.....
Image
And here's the little shithead.......
Image
What do you all think of the amount of slack in the timing chain
Image
Image

And one more question,going to install a mech.oil pressure guage....which one of these two senders would be best to eliminate for the new guage

Image

Thanks for any or all advice
Dan
Last edited by Mr. Jones on June 14, 2017, 5:05 pm, edited 1 time in total.
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
bruceandersson
Posts: 906
Joined: August 12, 2009, 9:44 am
Location: Ohio

Re: Pulling my 352

Post by bruceandersson »

The big one is for the gauge in the dash and the little one if for the light. So if you are replacing the gauge, swap out the big one.
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: Pulling my 352

Post by orangeRcode »

bruceandersson wrote:The big one is for the gauge in the dash and the little one if for the light. So if you are replacing the gauge, swap out the big one.
Good info. I wondered why there were 2 when I pulled my engine last summer. Just put em back like I found them.
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: Pulling my 352

Post by orangeRcode »

Dan, Looks like your freeze plugs were ready to be replaced. Mine looked mint compared to yours. But to be fair, 2 of them had been replaced with the rubber type ones.

My timing chain had more slop than that one and the teeth on the timing gear were worn so much they looked like a cresting wave. I could almost remove the chain by hand it was so loose. It's amazing it didn't jump a tooth or 2.

Keep up the good work and update us.
longcabjohn
Posts: 354
Joined: January 21, 2012, 1:08 pm
Location: waverly, Tn
United States of America

Re: Pulling my 352

Post by longcabjohn »

Since you are there, I would replace the timing set. Would be a lot cheaper that going back in later.



Johnny
If restoring a ford was easy, chevy guys could do it.
Post Reply