Page 1 of 1

'93 Lincoln 4.6L, good donor for engine swap?

Posted: October 24, 2017, 3:36 pm
by Zax63
Friend of mine just offered me a '93 4.6l Lincoln DOHC motor and trans. The combo has about 90k miles and was running great when it was pulled. Anybody familiar with these motors? Would it bolt up to a Crown Vic front crossmember if I do a Crown Vic front end swap?

Re: '93 Lincoln 4.6L, good donor for engine swap?

Posted: October 24, 2017, 3:44 pm
by orangeRcode
Love the 4V's. If I could find one of these combos cheap enough, I would put it the 65 I plan for a CV swap. I believe you would need specialty engine mounts. Several guys have used the 32 valves in their CV swap. Check out the FB for more info.

Not trying to push people away from the motherboard but there are a lot more guys on the FB swap pages to get him the info he needs. :cheers:

Re: '93 Lincoln 4.6L, good donor for engine swap?

Posted: October 26, 2017, 11:12 am
by Zax63
Found a guy on Youtube that has a later model slick with the same motor swapped in. Looks like it fits pretty well.

https://youtu.be/SOoT1fLI3GA

Re: '93 Lincoln 4.6L, good donor for engine swap?

Posted: October 26, 2017, 2:47 pm
by orangeRcode
Yes, the 4Vs fit well. They are very wide on top due to the big top end. I've seen the Cobra, Mach and Lincoln DOHC engines being swapped. Actually saw a Coyote 5.0 swapped as well. Those are more expensive since they are newer mills but would love to do one!