Does anyone make prevent stainless steel fuel lines for our trucks?
Thank You!
Stainless steel fuel lines
- Blackwaterforge
- Posts: 891
- Joined: March 13, 2008, 9:22 am
- Location: Alabama
- Contact:
Stainless steel fuel lines
If it cain't be fixed with a sledge hammer it must be an electrical problem!
-
- Posts: 40
- Joined: December 31, 2006, 9:36 pm
- Location: West Vancouver,British Columbia
Re: Stainless steel fuel lines
BWforge: Try Inline Tube. Here's the link: https://www.inlinetube.com/
It's a large complicated site, but keep digging and you'll find what you need.
It's a large complicated site, but keep digging and you'll find what you need.
- Blackwaterforge
- Posts: 891
- Joined: March 13, 2008, 9:22 am
- Location: Alabama
- Contact:
Re: Stainless steel fuel lines
Thank you!
If it cain't be fixed with a sledge hammer it must be an electrical problem!
Re: Stainless steel fuel lines
I know this thread is a couple months old, but I just ordered and installed the Inline Tube kit for my '63. I could not find the kit for my '63 on the Inline Tube website, but I was able to find it on Ebay.
I'm pretty impressed with the kit. All the bends were spot on. I did have to tweak the axle tubes so they connected to the wheel cylinders at the correct angle but it was a minor correction. The shipping bends were really easy to flatten out using the method in the instructions.
I'm pretty impressed with the kit. All the bends were spot on. I did have to tweak the axle tubes so they connected to the wheel cylinders at the correct angle but it was a minor correction. The shipping bends were really easy to flatten out using the method in the instructions.
'63 F100 Wrongbed
Re: Stainless steel fuel lines
I also used the brake line kit from Inline Tube. Went with the plain steel and everything went in really well.
I haven't replaced the fuel lines nor do I need to. However, if Inline Tube makes the fuel line kit, that's the one I'd go with.
I haven't replaced the fuel lines nor do I need to. However, if Inline Tube makes the fuel line kit, that's the one I'd go with.