clutch equalizer bar

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Kid, Casey 65

Post Reply
rwhistles
Posts: 553
Joined: October 15, 2006, 7:42 pm
Location: winter haven, Florida
United States of America

clutch equalizer bar

Post by rwhistles »

is there a difference in the v8 and straight 6 equalizer bar.
1961 F350 pick up
1962
1963
1964
1965
1966 F350 camper
9Fingers
Posts: 189
Joined: September 26, 2015, 8:14 pm
Location: Virginia
United States of America

Re: clutch equalizer bar

Post by 9Fingers »

The truck I'm working on is a 4x4 with a mid 70's 4x4 frame.

The truck had either 352 or 360 V8 and I swapped in a 300 straight six.

I used the same z-bar that was with the V8 when installing the 300.

The ball that screws into the block was already in the 300 and I've sold the V8 so I don't know if they are the same.
Always know where you will be, when you get where you're going - Jerry Clower
rwhistles
Posts: 553
Joined: October 15, 2006, 7:42 pm
Location: winter haven, Florida
United States of America

Re: clutch equalizer bar

Post by rwhistles »

well as long as you used the same bar from the v8 on the 6 and it worked ok you answered my question. I did the same thing. 8 out 6 in but clutch seemed to be engaged or disengaged no in between. thought might be the equalizer bar had a different throw than a 6.
1961 F350 pick up
1962
1963
1964
1965
1966 F350 camper
Post Reply