64 with memorys

A place just for our project & build threads.

Moderators: Kid, Casey 65

dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 2:58 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
User avatar
390fastback
Posts: 131
Joined: December 15, 2012, 4:44 pm
Canada

Re: 64 with memorys

Post by 390fastback »

Its quite a bit narrower then the CV. if you wanted to use the Cv rear you can, then you can run the same wheels front and back. I've got 17x9 Cragars with 1" spacers on the rear right now. You could go with a larger offset wheel, but i already had these.
62 short-uni, cv front swap, 4.6/auto
plus many other's!
Image
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: 64 with memorys

Post by orangeRcode »

I like those CV swap brackets. Who was the vendor?

I bought a running 05 police interceptor to use as a donor for a Slick swap. They can be found fairly cheap and make a great donor. I drove the car for a couple of months but my timing wasn't right and needed to free up some funds to purchase a car for my daughter. I sold the PI and made some quick cash. May look at doing that again once I find a good Slick.

Keep us updated on the project. Looking great thus far!
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 2:59 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 2:59 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
User avatar
390fastback
Posts: 131
Joined: December 15, 2012, 4:44 pm
Canada

Re: 64 with memorys

Post by 390fastback »

5" back space, just measured them.
62 short-uni, cv front swap, 4.6/auto
plus many other's!
Image
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 2:59 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 2:59 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 3:00 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 3:00 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 3:00 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 3:00 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 3:00 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
shipwrecked
Posts: 1457
Joined: December 29, 2012, 10:06 pm
Location: Yorktown VA
Contact:
United States of America

Re: 64 with memorys

Post by shipwrecked »

River city just did the crown Vic wiring. He has a video on YouTube for it.
The months may change, but I am always APRIL
'63 F100 Custom Cab 223inline 6, 3speed manual- mostly stock
https://www.youtube.com/coastiereid
Truck has been home in CA,OR,WA,NJ,VA since it's birth in San Jose Jan63
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 3:01 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
bruceandersson
Posts: 906
Joined: August 12, 2009, 9:44 am
Location: Ohio

Re: 64 with memorys

Post by bruceandersson »

I don't recall what engine/trans you are going with, but this may have some impact on the harness you choose. I've always used the stock harnesses, but I have kept my trucks pretty stock. Its been easy to add electronic ignition to a stock harness, but you'd run into some challenges if you want killer sound, a/c.....
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 3:01 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
shipwrecked
Posts: 1457
Joined: December 29, 2012, 10:06 pm
Location: Yorktown VA
Contact:
United States of America

Re: 64 with memorys

Post by shipwrecked »

https://m.youtube.com/watch?v=Jc2VuDHJ9P4

Link you should check out. Our fellow slick 60's member who is doing the crown Vic swap.
The months may change, but I am always APRIL
'63 F100 Custom Cab 223inline 6, 3speed manual- mostly stock
https://www.youtube.com/coastiereid
Truck has been home in CA,OR,WA,NJ,VA since it's birth in San Jose Jan63
bruceandersson
Posts: 906
Joined: August 12, 2009, 9:44 am
Location: Ohio

Re: 64 with memorys

Post by bruceandersson »

I think as long as you are not going with a fuel injected engine, any of the harnesses out there should work. They certainly vary in price, I see them from $200 to over $600. I am not sure what you get for the extra $s. Sometimes it is just the name.
dennyboy
Posts: 60
Joined: July 5, 2013, 2:47 pm

Re: 64 with memorys

Post by dennyboy »

.
Last edited by dennyboy on April 25, 2017, 3:01 pm, edited 1 time in total.
Master Certified Greasmonkey
Image
Post Reply