My Oz connection

Here you go guys. An Australian Chapter
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

My Oz connection

Post by Leeroy »

Whats going on boys?
I've been in and out of s60's lately, flat chat at work and bought a house so had to move 4 days before Christmas….. :boohoo:
Called the panel beater to check progress….. what progress he hasn't started yet….. :cussing: :cussing: :cussing: :cussing: :cussing: :cussing:
Almost a year down since the transaction with A McL, 2 body guys and STILL no progress……

So does anyone else have any good news???
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: My Oz connection

Post by Alan Mclennan »

Congrats on the new digs Leith, great time of year to move, did Santa find Spencer OK? :D

I`m planning on pushing Beryl out the garage early this year and finally getting her on the road, I `ve done something in the shed that I always swore I would not do. I put a shadow board on the wall ( without the shadows ), now all the most used tools are on the wall, not the bench.......... well for now anyhow! :roll:
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
557f1
Posts: 403
Joined: December 5, 2009, 6:23 pm
Location: australia
Australia

Re: My Oz connection

Post by 557f1 »

I bought my house just before christmas few years ago,It was fun trying to get things done when people were closing for xmas .

don't despair about your slick. I'm still building my first .
Today carpet went in followed by seat belts and in went the seat.
first time in a long time I have sat on seat in it,
Nice!
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: My Oz connection

Post by Leeroy »

Gotta be happy with that Darren! At least u can sit there and make gear change noises or the even slow cleveland cranking noise as the battery is running flat….. followed by click click click click from the solenoid….. c'mon you know that noise I'm talking about! :lol: :lol: Did you stick with the stock belts? I'm toying with inertia reals which was in slick 1, but never found out where they came from.

Al, yes santa came….. And he's the only grandson on my side, so boy oh boy did he clean up!
Shadow board??? shudder…… the new/old residence has THIS!

Image

So what are you gonna do with Beryl???
User avatar
Toyz
Posts: 4333
Joined: March 22, 2011, 6:23 pm
Location: Baja Houston Taxes
United States of America

Re: My Oz connection

Post by Toyz »

I'm almost afraid to ask! "Shadow board" as in pegboard with tool outlines "shadowing" their proper locations?
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
User avatar
557f1
Posts: 403
Joined: December 5, 2009, 6:23 pm
Location: australia
Australia

Re: My Oz connection

Post by 557f1 »

Yeah Lieth .Very happy ,I even had to go back in the shed last night and sit on it again.
I using seat belts I bought at Longbeach swapmeet sometime ago.
it's a bigblock ford with a c6 auto .So it's more a a loud vrm vrm than a brm brm!

Image

Image



Image


Image

My recessed fuel filler

Image
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: My Oz connection

Post by Leeroy »

ohhhhhh looks very Nice Daz, love the hood lining. Did I see courtesy lights up top?

Looks like a raised bed floor too!! :D Ticking all the right boxes :clap: :clap:
User avatar
557f1
Posts: 403
Joined: December 5, 2009, 6:23 pm
Location: australia
Australia

Re: My Oz connection

Post by 557f1 »

Yes you did, it's one of those flash Billet Specialties one's, it's a nice touch and even better is when the lenses keep falling out of it,
raised bed hides alot,
Nissan Homer rear chassis rails,xf falcon fuel tank,9in irs diff,battery box and a water/methonal injection tank &pump

Image

Image

Image
User avatar
foodstick
Posts: 3364
Joined: March 15, 2006, 6:45 pm

Re: My Oz connection

Post by foodstick »

Dang, I wish you would have BEEFed that frame up a little !
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: My Oz connection

Post by Alan Mclennan »

All I can say Dazza is First class! :clap: , I don`t think I`ve seen a filler in that possie before and the interior is a credit to you mate!, how`d those door trims go?

Leith I could hardly see the peg board for the glare of something big red and Shinny, I `m not doing the shadow thingy, try and keep the old grey matter working out what goes where! :lol:
I did notice a shadow of a big pair of stilsons, they`ll get most things fixed!
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
557f1
Posts: 403
Joined: December 5, 2009, 6:23 pm
Location: australia
Australia

Re: My Oz connection

Post by 557f1 »

Thanks guy's
I should be hanging the doors tomorrow and I'll have a go at the door trims,
I'm sort of thinking about deleting the speaker holes I put in them and moving them to the kick panels

I to noticed another out line on the shadow board , what looks like a stanley brace drill
mine has a clutter of drag bike parts,performance parts and tools

so what is happening to Beryl?
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: My Oz connection

Post by Alan Mclennan »

I`m just resuming her build Daz, after unknown time sitting :(
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: My Oz connection

Post by Leeroy »

stilsons!! now there's a word a haven't heard for awhile..... You sound like my dad Al! Must be a baby boomer saying!! :lol: We gen X's call em vice grips!

Luckily the peg/shadow board is not mine.... PO's idea. Pity the roof that's leaking like a sieve isn't as well thought out as the pegboard!! :cussing: grrrrr leaked on the toolchest too!!

Daz what can I say about the chassis/build in general other than WOW! You're going all out and I Love it! Wish I had ur skills.... And patience!!

Now I'm glad my thread has stirred you blokes up! Bout time you lot did some work!
Hahaha just kidding...... I Think I'm the slackest at the moment!!
Last edited by Leeroy on January 2, 2014, 12:57 am, edited 1 time in total.
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: My Oz connection

Post by Alan Mclennan »

:P I believe that Stilsons were the tool of choice of many a fine Plumber years gone by!, now we mainly use glue! :roll:
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
557f1
Posts: 403
Joined: December 5, 2009, 6:23 pm
Location: australia
Australia

Re: My Oz connection

Post by 557f1 »

Here you go Maaaate!

Image
Leeroy
Posts: 1115
Joined: July 12, 2009, 3:52 am
Location: Melbourne, Australia
Australia

Re: My Oz connection

Post by Leeroy »

Maaaate, great job with those door trims. Couldn't really think of a better way to do them on the slick! If you delete the speaker, will you continue the teardrop to the kick panel or delete altogether?
User avatar
1964 700
Posts: 82
Joined: May 23, 2012, 6:50 pm
Australia

Re: My Oz connection

Post by 1964 700 »

Hi Guys,
I have done a bit more to mine the last couple of weeks, I made the hinge & did the hydraulics for the tilting tray so I can load the Comet without finding a hill, got it all finished with a couple of days to spare for summernats. John

Image

Image
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: My Oz connection

Post by Alan Mclennan »

Hi John, I saw your truck and Comet on the news on sunday, looking good mate!
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
User avatar
557f1
Posts: 403
Joined: December 5, 2009, 6:23 pm
Location: australia
Australia

Re: My Oz connection

Post by 557f1 »

Wow!, that gets more impressive every time I see it,
User avatar
1964 700
Posts: 82
Joined: May 23, 2012, 6:50 pm
Australia

Re: My Oz connection

Post by 1964 700 »

Thanks, yours is coming along nicely.

Alan, I heard it was on TV, didn`t see it, do you know theres a swap at sydney dragway on the 19th in a couple weeks & the all american car day at castle towers shopping center on the same day, I just found out the truck won`t fit in the carpark misses out by 50mm will have to take the Comet. John
Post Reply