a couple more in article about vintage V8s Couldn't find access to the mag on line ,if you can fine it worth the read. Tom
https://www.texture.com/wp-content/uplo ... 25x300.jpg
Hot Rod Magazine April 2016 Y block on cover
-
- Posts: 612
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ
Hot Rod Magazine April 2016 Y block on cover
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
Re: Hot Rod Magazine April 2016 Y block on cover
Tom: I already have the JULY issue, so the April issue has been out for quite awhile:)
Did a quick search on the hotrod website, came up with some links relating to Y blocks
http://www.hotrod.com/search/?q=y%2bblock
Did a quick search on the hotrod website, came up with some links relating to Y blocks
http://www.hotrod.com/search/?q=y%2bblock
-
- Posts: 612
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ
Re: Hot Rod Magazine April 2016 Y block on cover
Jamesdfo, I get the magazines second hand so some are a couple months old when I get them , then I need time to read them, then I pass them on. It is called ( 2016 ENGINE MASTERS CHALLENGE ) page 34 .Tom
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder