I need to install a circuit breaker or fuze link in my 66 f100 power to cab wire. Anyone have a suggestion of what amperage breaker or link I would need to use.
Theres nothing extra in the circuits on this truck.
I am running the headlights off of relays powered from the battery so the light switch is carring a lighter load than stock also.
circuit breaker question
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
the big slicks used a 70 amp circuit breaker, i doubt you need that much.
i dont care for the fusible links they used in some later trucks.
i think it depends on the amperage of alt/gen.
curious as to why you need one?
i dont care for the fusible links they used in some later trucks.
i think it depends on the amperage of alt/gen.
curious as to why you need one?
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Actually I probably do not need one. The harness is in good shape with fresh tape wrapping and in wire tubing.
I guess after working on crusty old forestry & construction equipment for years my mindset is on overkill for wiring protection.
Really all I do have to worry about is hungry mouse. Its not like its going to be full of leaf litter and hydraulic oil or anything
Thanks for the reality check Iceman
I guess after working on crusty old forestry & construction equipment for years my mindset is on overkill for wiring protection.
Really all I do have to worry about is hungry mouse. Its not like its going to be full of leaf litter and hydraulic oil or anything
Thanks for the reality check Iceman