I came across this site that sells a product called Super Alloy 1 for welding and repairing pot metal. Videos show how it works and you can use a propane torch or an O/A setup.
Very useful for repairing parts that are not produced anymore.
http://www.muggyweld.com/index2.html
They have a lot of other good information on welding, brazing, etc.
Welding Pot Metal (and more)
Welding Pot Metal (and more)
"If you don't want to stand behind our Troops, feel free to stand in front of them."
1964 Ford F100
1967 US Army M416
1964 Ford F100
1967 US Army M416
- Uncle Skip
- Posts: 4695
- Joined: July 15, 2006, 8:30 pm
- Location: Pearland, Texas
- Alan Mclennan
- Posts: 9324
- Joined: October 14, 2006, 6:16 pm
- Location: In the shed... Cranebrook NSW
A Bloke has been selling the super alloy rods at swap meets for 10 or more years here!, he does a demonstration where he welds a soft drink can. I have used it with reasonable success.
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................![cry.gif cry.gif](./images/smilies/cry.gif)
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
![cry.gif cry.gif](./images/smilies/cry.gif)
-
- Posts: 2582
- Joined: March 10, 2007, 12:49 am
- Location: Arizona
wow, if you were really in a fix, it would be great. kinda prohibitive price for burning stuff together for fun. Definitely not cheap.... I think they think they got somethin' special and a corner on the market.....
$50 for 1/2 lb/ 5 rods.... eek!
$50 for 1/2 lb/ 5 rods.... eek!
'63 with 390 & lots of juice. But never enough. Always want more.
![Image](http://i31.photobucket.com/albums/c392/shetlcc7/my%20photos/ratcroplittle.jpg)
![Image](http://i31.photobucket.com/albums/c392/shetlcc7/my%20photos/newgrillelittle.jpg)
![Image](http://i31.photobucket.com/albums/c392/shetlcc7/my%20photos/saltflatnotoplittle.jpg)
![Image](http://i31.photobucket.com/albums/c392/shetlcc7/my%20photos/ratcroplittle.jpg)
![Image](http://i31.photobucket.com/albums/c392/shetlcc7/my%20photos/newgrillelittle.jpg)
![Image](http://i31.photobucket.com/albums/c392/shetlcc7/my%20photos/saltflatnotoplittle.jpg)
i was trying to mig weld a column tube. and i started on the lowest settign. and i could chip off the weld because it wasnt penetrating. i kept turning the machine up on heat range at a time. and then my dad walks in and says i can gas weld that for you. and i told him i didnt want to braze it. he said he wasnt going to braze it. he got out the torch and some cailing wire. he then welded the tube back together with no flux no nothing. just the bailing wire and the heat of the torch. it worked very well. it pentrated fien and made a very good looking weld.
-
- Posts: 157
- Joined: May 13, 2007, 7:36 am