62 unibody build

twistedfreak · Post by **twistedfreak** » December 4, 2010, 10:38 pm

oh heres the link to the folder
http://s63.photobucket.com/albums/h130/ ... rd%20f100/

Post by **Greg D** » December 4, 2010, 11:21 pm

If you post the link when you are logged in it asks us for your password.
Try logging out and then posting a link to the album.

MadMaxetc · Post by **MadMaxetc** » December 5, 2010, 12:10 am

http://s63.photobucket.com/home/fishman21

Looks like you un-shared your album.

twistedfreak · Post by **twistedfreak** » December 5, 2010, 8:36 pm

lets try this one i made it public so well try it again

http://s63.photobucket.com/albums/h130/ ... rd%20f100/

SixtySix Ford · Post by **SixtySix Ford** » December 10, 2010, 2:30 pm

Nice build Twisted!

Question....how do you plan to mount your Manuel rack? Im guessing your going to weld a couple tubes to your front axle then have a slip yoke for the streering rod?

any new updates?

twistedfreak · Post by **twistedfreak** » January 2, 2011, 8:30 pm

quick question can i get the thread for the seat bolts i cant find mine and dont want to bucher then or rethread thenm just yet

twistedfreak · Post by **twistedfreak** » January 14, 2011, 4:11 pm

got the air compressor up and running and now im ready to work on the truck

twistedfreak · Post by **twistedfreak** » January 15, 2011, 8:21 pm

well like i said i finally got my air back up and running after the pump went out and now the work is back in gear got most of the passenger side floor back in after i got it cut out and its not started welded in tomorrow it the front half and the moving over to the drivers side also cant wait till my stainless brake and fuel lines get here so i can start on that

MadMaxetc · Post by **MadMaxetc** » January 15, 2011, 9:19 pm

Looks like the new floor is rusier than the old floor was! JK

Looking good. I plan to fix my cab this spring.

twistedfreak · Post by **twistedfreak** » January 17, 2011, 7:00 pm

sat in my side barn and it got rained on and didnt get it in time its just that side and i havent got it cleaned up yet

twistedfreak · Post by **twistedfreak** » January 18, 2011, 9:52 pm

heres some of the latest work on the rod got the floors finished up on the passenger side and ill start on the driver tomorrow

twistedfreak · Post by **twistedfreak** » January 20, 2011, 1:02 pm

well i got some more done this morning and more this evening had to go get the kids from the sitters but, ill get this evenings picks up as soon as i get them but heres the picks of what i got done this am.

noley99 · Post by **noley99** » January 24, 2011, 9:24 pm

Looking good. I hope you don't mind but I'm taking some of your ideas and applying them to my build.

twistedfreak · Post by **twistedfreak** » January 27, 2011, 11:35 pm

not a prob let me know if you need any help and heres some more picks from tonight getting the rear fills fitted

Max · Post by **Max** » January 28, 2011, 3:31 am

Nice work! Not sure how you're going to put seatbelts in, but I would've put in shoulder belt attachments on those corners before tacking them inside the cab since you had access to the backsides.

twistedfreak · Post by **twistedfreak** » January 28, 2011, 10:55 am

im using Simpson lap harnesses so no post belts just lap since our truck didnt even come with seat belts back then

twistedfreak · Post by **twistedfreak** » January 28, 2011, 1:04 pm

got some holes filled today and more working on now had to take a brake to eat but here ya go.

noley99 · Post by **noley99** » January 28, 2011, 2:31 pm

Looking good.

Man I need a shop!

kstones63 · Post by **kstones63** » January 28, 2011, 4:18 pm

Those pics bring back memories of all the hours spent filling holes on my firewall.
It's looking great.

Kevin

twistedfreak · Post by **twistedfreak** » January 28, 2011, 4:47 pm

passengerside all finished up now just have to wait for my clutch res and off to the drivers side