lowering your twin i beam truck

A place just for our project & build threads.

Moderators: Kid, Casey 65

Post Reply
oldred
Posts: 7
Joined: August 13, 2009, 10:49 pm
Location: johnson city tn.
United States of America

lowering your twin i beam truck

Post by oldred »

hey guys if you have a twin i beam truck and want to lower it and don't want to cut it up. text me or message me. i have built a kit thats 50/50 weld and bolt in or 100% bolt in if you have good drill bits.lol i currently have the 1st one in my 77 f100 drives good and no bumpsteer. uses your original crossmember i didnt even remove the engine. and you can put it back stock if you want to. i know its the wrong year for most of you guys but my reserch shows it should work fine. text my phone and ill send you some photos 423-737-9645. crown vic suspension is good but i didn't want to cut up my truck. and i wanted to use my wheels that were - offset my 62 unibody has mustang ll suspension and that truck is my connection with this site. got the 77 in a trade. uses mustang ll arms and spindles. :idea:
Last edited by oldred on October 11, 2017, 3:51 pm, edited 1 time in total.
4.6/dohc
8ba flattie
351w
ratrapp
Posts: 111
Joined: November 28, 2016, 6:25 pm
Location: buena vista,va

Re: lowering your twin i beam truck

Post by ratrapp »

definitely interested.i already have a 77 twin I beam suspension up front to get power disc brakes.
oldred
Posts: 7
Joined: August 13, 2009, 10:49 pm
Location: johnson city tn.
United States of America

Re: lowering your twin i beam truck

Post by oldred »

if you can text me on the number on the post and ill send you some photos. thanks
4.6/dohc
8ba flattie
351w
ratrapp
Posts: 111
Joined: November 28, 2016, 6:25 pm
Location: buena vista,va

Re: lowering your twin i beam truck

Post by ratrapp »

I tried texting but got no response.
oldsmiley
Posts: 281
Joined: December 20, 2016, 9:28 am
Location: Durham nc
Contact:
United States of America

Re: lowering your twin i beam truck

Post by oldsmiley »

I'd be interested too.....
User avatar
jkimbrel65
Posts: 965
Joined: July 11, 2006, 8:53 pm
Location: Athens Al
United States of America

Re: lowering your twin i beam truck

Post by jkimbrel65 »

interested

Mike
I tried being normal once...
was the worst 10 minutes of my life
grump
Posts: 957
Joined: September 14, 2006, 6:47 pm
Location: ohio

Re: lowering your twin i beam truck

Post by grump »

I sent a text yesterday but haven't heard anything back.
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: lowering your twin i beam truck

Post by orangeRcode »

I'm interested as I've got 75 front end to go in for the disc brakes. Sent PM.
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: lowering your twin i beam truck

Post by orangeRcode »

Anyone heard from him?
ratrapp
Posts: 111
Joined: November 28, 2016, 6:25 pm
Location: buena vista,va

Re: lowering your twin i beam truck

Post by ratrapp »

I haven't.
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: lowering your twin i beam truck

Post by orangeRcode »

So apparently, the trail has gone cold with no response from oldred. Anyone got contact info for him on FB or otherwise?
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: lowering your twin i beam truck

Post by orangeRcode »

Oldred = 1 hit wonder. Wished he would post back here or respond to one of us. :argue:
66redrider
Posts: 75
Joined: November 3, 2015, 7:12 pm

Re: lowering your twin i beam truck

Post by 66redrider »

Why not just post the pics in the thread?
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: lowering your twin i beam truck

Post by orangeRcode »

The guy was a flake. He posted that here and then never responded to anyone's PMs or questions.
Post Reply