lowering your twin i beam truck
lowering your twin i beam truck
hey guys if you have a twin i beam truck and want to lower it and don't want to cut it up. text me or message me. i have built a kit thats 50/50 weld and bolt in or 100% bolt in if you have good drill bits.lol i currently have the 1st one in my 77 f100 drives good and no bumpsteer. uses your original crossmember i didnt even remove the engine. and you can put it back stock if you want to. i know its the wrong year for most of you guys but my reserch shows it should work fine. text my phone and ill send you some photos 423-737-9645. crown vic suspension is good but i didn't want to cut up my truck. and i wanted to use my wheels that were - offset my 62 unibody has mustang ll suspension and that truck is my connection with this site. got the 77 in a trade. uses mustang ll arms and spindles.
Last edited by oldred on October 11, 2017, 3:51 pm, edited 1 time in total.
4.6/dohc
8ba flattie
351w
8ba flattie
351w
Re: lowering your twin i beam truck
definitely interested.i already have a 77 twin I beam suspension up front to get power disc brakes.
Re: lowering your twin i beam truck
if you can text me on the number on the post and ill send you some photos. thanks
4.6/dohc
8ba flattie
351w
8ba flattie
351w
Re: lowering your twin i beam truck
I tried texting but got no response.
Re: lowering your twin i beam truck
I'd be interested too.....
- jkimbrel65
- Posts: 965
- Joined: July 11, 2006, 8:53 pm
- Location: Athens Al
Re: lowering your twin i beam truck
interested
Mike
Mike
I tried being normal once...
was the worst 10 minutes of my life
was the worst 10 minutes of my life
Re: lowering your twin i beam truck
I sent a text yesterday but haven't heard anything back.
-
- Posts: 838
- Joined: August 2, 2014, 10:38 pm
- Location: Mustang, OK
Re: lowering your twin i beam truck
I'm interested as I've got 75 front end to go in for the disc brakes. Sent PM.
-
- Posts: 838
- Joined: August 2, 2014, 10:38 pm
- Location: Mustang, OK
Re: lowering your twin i beam truck
Anyone heard from him?
Re: lowering your twin i beam truck
I haven't.
-
- Posts: 838
- Joined: August 2, 2014, 10:38 pm
- Location: Mustang, OK
Re: lowering your twin i beam truck
So apparently, the trail has gone cold with no response from oldred. Anyone got contact info for him on FB or otherwise?
-
- Posts: 838
- Joined: August 2, 2014, 10:38 pm
- Location: Mustang, OK
Re: lowering your twin i beam truck
Oldred = 1 hit wonder. Wished he would post back here or respond to one of us.
-
- Posts: 75
- Joined: November 3, 2015, 7:12 pm
Re: lowering your twin i beam truck
Why not just post the pics in the thread?
-
- Posts: 838
- Joined: August 2, 2014, 10:38 pm
- Location: Mustang, OK
Re: lowering your twin i beam truck
The guy was a flake. He posted that here and then never responded to anyone's PMs or questions.