It's about time to start tearing down my f100 to swap in my new motor and front IFS. My stock 223, tranny, front suspension parts, steering column, etc will all be available. Everything is still currently together and the 223 is running. The motor has a rebuilt carb, recent tune up, new fuel pump, and the starter has been rebuilt. The tranny shifts through all the gears but needs a new clutch. I recently replaced all the shifter bushings and the collar on the steering column.
I'm thinking around $300 for the motor and transmission. If some one is interested in the column, front suspension, or other parts we can work on a price for those as well. Located in the North Atlanta area. You can come hear the motor run before it is pulled if local or I can take videos of it starting and running.
'63 f100 stock drivetrain
'63 f100 stock drivetrain
'63 F100 Wrongbed
Re: '63 f100 stock drivetrain
I sent you a PM
Re: '63 f100 stock drivetrain
So, where in "North Atlanta" could I find you?
Robert
Robert
Re: '63 f100 stock drivetrain
Western Forsyth County.Day 2 wrote:So, where in "North Atlanta" could I find you?
Robert
'63 F100 Wrongbed
Re: '63 f100 stock drivetrain
Ah, the good ole times I could tell you about Cumming....gotta lotta friends there. I used to live over in Fulton County {now Milton}on Hopewell Rd. We sold out to a BIG sub-division and moved up here to piece and quite.
Re: '63 f100 stock drivetrain
My wife and I are from the Gainesville, Hall county area. Only been in Forsyth about 4 years. We’re lucky enough to have an older house not in a subdivision. Let me know if you interested in any of the original drivetrain parts. I hope to start tearing the truck down in the next month or so.Day 2 wrote:Ah, the good ole times I could tell you about Cumming....gotta lotta friends there. I used to live over in Fulton County {now Milton}on Hopewell Rd. We sold out to a BIG sub-division and moved up here to piece and quite.
'63 F100 Wrongbed
-
- Posts: 291
- Joined: April 15, 2010, 12:25 am
- Location: Paso Robles, Ca
Re: '63 f100 stock drivetrain
I'm looking for a clutch equalizer bar. Do you have one that you don't need? Thank you.
-don
'64 F100 262-I6
'64 F100 262-I6
-
- Posts: 408
- Joined: December 27, 2009, 6:03 pm
- Location: durham missouri
Re: '63 f100 stock drivetrain
What are you thinking on the column? Do you have the shift linkage also?
Every day above ground is a good one