I'm looking for the inserts that hold the "Custom Cab" emblems in the doors. I have emblems but there was no attaching hardware with them.
Thanks for any help y'all can provide!
Fasteners for door emblems
-
- Posts: 344
- Joined: October 3, 2009, 8:22 am
- Location: Mooresville, NC
-
- Posts: 354
- Joined: January 21, 2012, 1:08 pm
- Location: waverly, Tn
Re: Fasteners for door emblems
They are called barrel nuts. When I had a body Shop, I got them in a assortment of sizes but could be bought in 1 size packages . If you have access to an old shop
pre 2000 they might have some .
Johnny
pre 2000 they might have some .
Johnny
If restoring a ford was easy, chevy guys could do it.
- FarmMotorSports
- Posts: 431
- Joined: November 13, 2010, 6:55 pm
- Location: KS, Lawrence
Re: Fasteners for door emblems
Barrel nuts , barrel clips depending on who is labling them. Some of the older parts stores will have them. Older body shops should have them. Otherwise LMC, Amazon, or ebay. Get new, dont fool with old ones... Been there done that...
61 F250 Unibody
5.9 Ford Diesel / Allison
Disk brake straight axle
5.9 Ford Diesel / Allison
Disk brake straight axle
-
- Posts: 344
- Joined: October 3, 2009, 8:22 am
- Location: Mooresville, NC
Re: Fasteners for door emblems
I realize I wasn't clear in what I was asking about the retainers. I was wanting to know what hole size they used because I've seen 5/32", 1/4" etc. Got a bag of 20 from NAPA. They had to order them but were in the next day. All worked out just fine. Thanks for the replies!