Ford Door locks

ivaf100 · Post by **ivaf100** » December 18, 2006, 8:59 pm

Can anyone help me with this problem. My daughter bought a 2006 Taurus and it didn't have a keyless remote with it. I purchased one and followed the programing directions but it won't work. I checked on keylessride.com and they say all '06 Taurus's have keyless entry. I checked the fuse, the locks work with the button on the door. I turned the switch off to on 8 times in 10 sec. to get in program mode, there is a beep but the locks don't lock and unlock like they are supposed to. All late model Fords are supposed to be the same. If anyone can help, I would sure appreciate it.
Ivaf100

MadMaxetc · Post by **MadMaxetc** » December 18, 2006, 9:33 pm

I would start with the obvious...(you probly did this)

check the battery in the remote. Then the power to the module/recever.

ivaf100 · Post by **ivaf100** » December 18, 2006, 10:14 pm

Thanks for responding. Where is the module receiver???

Hawkrod · Post by **Hawkrod** » December 19, 2006, 1:03 am

I can tell you for sure that not all late model Fords program the same way. I recently did a Mustang and after tearing my hair out following the directions, I got my hands on a shop manual and found out that there are something like 6 different Ford programing systems in use. After carefully reading the Ford manual I found out that I had to push a button on the BCM. Hawkrod