Slick 60's

will a clutch rod from a 67-72 f100 work on my 65?

evidently lmc dont make one for my truck

nevermind i found one for my 65 with bushings from macs...

thanks

Just in case you wanted to do an upgrade. Here is what I did on my 67.

https://sites.google.com/site/madmaxetc ... ge-upgrade

MadMaxetc wrote:Just in case you wanted to do an upgrade. Here is what I did on my 67.

https://sites.google.com/site/madmaxetc ... ge-upgrade

looks like a previously broken rod

you know if and when that end breaks off it makes a really loud noise as the rest of the linkage springs back and the throwout bearing slams the disc back against the flywheel. then you put your trans in 2, start in gear and go clutchless.hopefully your lucky and are not in a city.

man thats pretty sweet if this bushings dont last long i may do that upgrade.. but i figure my truck wont get 5,000 miles on it in 20 years when its done lol

clutch rod spose to be here tomorrow !!!

MadMaxetc wrote:Just in case you wanted to do an upgrade. Here is what I did on my 67.

https://sites.google.com/site/madmaxetc ... ge-upgrade

Thanks for posting that.

If anyone needs one or wants a spare I have a leftover. Free for the price of shipping!

DV65CustomCab wrote:If anyone needs one or wants a spare I have a leftover. Free for the price of shipping!

do bear in mind that not all of the rods are the same length, 65-66 2wd are the same, other years and 4x4s are different