fender to upper filler alignment
-
- Posts: 20
- Joined: August 8, 2013, 2:19 am
fender to upper filler alignment
Can someone post some pics of the way their fender meets with the filler panel under the hood. I think mine is bent or just not right.
- therealjoeshmoe
- Posts: 1059
- Joined: July 24, 2006, 2:18 am
- Contact:
Re: fender to upper filler alignment
i bet your front rubber cab mounts are bad and sagging..
- 390fastback
- Posts: 131
- Joined: December 15, 2012, 4:44 pm
Re: fender to upper filler alignment
Agreed, if your front mounts are gone, you'll have a wedge shaped gap at the cowl, and at the doors. The gap will be tight at the top and wide at the bottom. It would be pretty tough to bend that top filler peice.
62 short-uni, cv front swap, 4.6/auto
plus many other's!
plus many other's!
- therealjoeshmoe
- Posts: 1059
- Joined: July 24, 2006, 2:18 am
- Contact:
- skidoorulz
- Posts: 359
- Joined: April 11, 2013, 9:02 pm
- Location: Billings MT
Re: fender to upper filler alignment
I'm reading this as he wants pics of the front of the truck between grill and hood? Where the panel bolts to the fender?
-
- Posts: 20
- Joined: August 8, 2013, 2:19 am
Re: fender to upper filler alignment
skidoorulz, you are on it! The bottom edge of my filler dips down further than the fender. I'm not sure if this is the way it should be.
Re: fender to upper filler alignment
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
- skidoorulz
- Posts: 359
- Joined: April 11, 2013, 9:02 pm
- Location: Billings MT
Re: fender to upper filler alignment
Good picture toyz now I don't have to find mine
- skidoorulz
- Posts: 359
- Joined: April 11, 2013, 9:02 pm
- Location: Billings MT
- 390fastback
- Posts: 131
- Joined: December 15, 2012, 4:44 pm
Re: fender to upper filler alignment
Sorry, My missunderstanding! I can't show mine cause it doesn't line up worth a dam either!
62 short-uni, cv front swap, 4.6/auto
plus many other's!
plus many other's!
-
- Posts: 20
- Joined: August 8, 2013, 2:19 am
Re: fender to upper filler alignment
Thanks guys
- ezernut9mm
- Posts: 9141
- Joined: July 21, 2006, 9:37 pm
- Location: KCMO
Re: fender to upper filler alignment
mine sucks as well. i have been jacking with the adjustments though. this is actually better than at first.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
- milldinaire
- Posts: 125
- Joined: December 28, 2012, 7:50 pm
- Location: Crockett, CA
Re: fender to upper filler alignment
I moved my core support mounting hole forward 3/16 on the drivers side to line my fender and upper valace up. Worked like a charm.