Crossmember at radius arm brackets
-
- Posts: 500
- Joined: July 25, 2006, 8:44 pm
- Location: Dayton Ohio
Crossmember at radius arm brackets
I think someone decided to play a joke and have the upper bolted and lower riveted,today I replace the rivets with bolts so it can be removed so the 460/C-6 can be removed as one. It went in with the front clip removed and not going to remove it to pull the motor.
- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:
Re: Crossmember at radius arm brackets
it's no joke,, What in the heck was Ford thinking of ask Chris few slick stocks back in that garage trying to get the rivots out with several under his truck some of the dentsides have a different cross member to get the trans out without doing that or pulling engine/trans as one unit
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,, Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,, Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
- Alan Mclennan
- Posts: 9324
- Joined: October 14, 2006, 6:16 pm
- Location: In the shed... Cranebrook NSW
Re: Crossmember at radius arm brackets
Remember that well Tom, was at Dave's place during the BBQ6166 Junkyard Dog wrote:it's no joke,, What in the heck was Ford thinking of ask Chris few slick stocks back in that garage trying to get the rivots out with several under his truck some of the dentsides have a different cross member to get the trans out without doing that or pulling engine/trans as one unit
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
Re: Crossmember at radius arm brackets
Those were rivets on Chris's? Coulda sworn they were bridge pilings!
Paul
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
-
- Posts: 500
- Joined: July 25, 2006, 8:44 pm
- Location: Dayton Ohio
Re: Crossmember at radius arm brackets
I think I had those rivets out in less then a hour,that 460/c-6 came out easy with it out of the way.