2 Questions about 66 352 manifold
-
- Posts: 612
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ
2 Questions about 66 352 manifold
If I take off the sheet metal cover for cleaning under the manifold will I be able to replace it and the little pipe that comes out the front is rusted out , can it be replaced and who sells it or can I just put a piece of 1/2" copper in place of it? Thanks Tom
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
Re: 2 Questions about 66 352 manifold
Are you referring to the water passage on the front of manifold? Mine was rusted out also,I bought a tap and threaded the hole for a threaded pipe.... will need to check the size and let you know what was used.....
Dan
Dan
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
Re: 2 Questions about 66 352 manifold
3/8-18NPT copper and steel should never be in contact with each other,not sure if the threaded fitting came from an auto parts store or Home Depot
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
-
- Posts: 612
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ
Re: 2 Questions about 66 352 manifold
Thanks Mr. Jones I still need to know about the sheet metal that's attached to the bottom of the intake manifold. Tom
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
Re: 2 Questions about 66 352 manifold
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
Re: 2 Questions about 66 352 manifold
That is an excelent guide. His identification guide is off, my understating that is due to the information he had at the time. Very well laid out procedure and torque specs. My original copy is about 25 years old.Mr. Jones wrote:
Chris