Brand new only installed once.... No chips, nick's, cracks or scratches.
Has the dark tint strip across the top.
This is only suitable for chop top slicks!
This a factory Bo-Bo, it's a quarter inch to narrow and short, otherwise perfect...
If you want it, you pick it up just south of Lawrence Kansas... It should be available by November.
At least I hope to have a replacement installed by then.
May also deliver to SS , no guarantee on condition after a ride up in the bed of my slick.
Carlite W-602 windshield. ( Free )
- FarmMotorSports
- Posts: 431
- Joined: November 13, 2010, 6:55 pm
- Location: KS, Lawrence
Carlite W-602 windshield. ( Free )
61 F250 Unibody
5.9 Ford Diesel / Allison
Disk brake straight axle
5.9 Ford Diesel / Allison
Disk brake straight axle
Re: Carlite W-602 windshield. ( Free )
how much of a chop. Not quite a 4 hr drive for me.
There are some Days I should not be let to go into the public without adult supervision
- FarmMotorSports
- Posts: 431
- Joined: November 13, 2010, 6:55 pm
- Location: KS, Lawrence
Re: Carlite W-602 windshield. ( Free )
I'll bring it to ya at SS... It's only a little short and narrow at the top... 1/4" each way at the top...
If you need it before then I'll work something out with you and meet you half way or better.
If you need it before then I'll work something out with you and meet you half way or better.
61 F250 Unibody
5.9 Ford Diesel / Allison
Disk brake straight axle
5.9 Ford Diesel / Allison
Disk brake straight axle
Re: Carlite W-602 windshield. ( Free )
Maybe we can get the guys in KC and surrounding area to meet for lunch some Saturday and we will drive down and pick it up.
There are some Days I should not be let to go into the public without adult supervision
- FarmMotorSports
- Posts: 431
- Joined: November 13, 2010, 6:55 pm
- Location: KS, Lawrence
Re: Carlite W-602 windshield. ( Free )
OK, LMC windshield installed with the same Dennis Carpenter gasket. And the fit is only marginally better if any... All four corners still have a 1/8" to 1/4" gap.
My 1964 bus windshield and 61 gasket that had shrunk so much it had torn at the original seam and had a 2" gap in the center of the gasket, and was hard as nails but did NOT have gaps like this in the corners.
I compared the original Ford to the LMC and Carlite windshield.
The Ford was thickest at 1/4".
The LMC was only thinner by a 1/64 or less.
The Carlite the worst at 3/16" thick.
Shape of all the windshields is the same as far as I can tell by stacking them next to each other.
So I am at a lost. I may pop it back out in the spring and try the LMC gasket.
61 F250 Unibody
5.9 Ford Diesel / Allison
Disk brake straight axle
5.9 Ford Diesel / Allison
Disk brake straight axle