Returning to Slicks
Returning to Slicks
After being away from these trucks for over ten years I am glad to be back. I am looking to pick up a 66 F100, 4x2, 300/3 Spd column (checking it out tomorrow). I want to build a 460/C6 to install so what perches (where to get them) do I need, what cross member do I need for the transmission? Not sure if I will do the EFI route or not. Also, I would rather NOT put a floor selector so what is a good source for A/T selector (change out)? I appreciate the guidance.
Re: Returning to Slicks
good2bea9: 
The answers to your questions (as well as some you haven't asked yet) should be in the link. AND, if you take the time to search on this site, you will likely find that many questions that will come up have been asked and answered a number of times over the years....
........and there is also a "Hints & Tricks" section viewforum.php?f=5
Cheers!
James
http://www.fordification.com/tech/technical-index.htm
http://www.fordification.com/tech/engine-perches.htm
The answers to your questions (as well as some you haven't asked yet) should be in the link. AND, if you take the time to search on this site, you will likely find that many questions that will come up have been asked and answered a number of times over the years............and there is also a "Hints & Tricks" section viewforum.php?f=5
Cheers!
James
http://www.fordification.com/tech/technical-index.htm
http://www.fordification.com/tech/engine-perches.htm
Re: Returning to Slicks
welcome back!! what was the decision on the truck? inquiring minds would like to know.. 
