stock suspension parts needed

[unclejtl]

so I dropped my truck with a DJM kit then cut a coil up front and axle flip in the rear. now i'd like to raise it back up a little since we got a vintage trailer I need to tow with it.

i'm in need of stock front springs, rear shackles and rear spring front brackets.

i'm in deer park wa. just north of spokane.

thanks
Jason

[MY OL 66]

Well, I have a set of lowering beams on my '66, but still have the stock springs.
How much lower is the front with both the beams and the cut springs.?
I might be interested in swapping the front springs.

Thanks!

[ratrapp]

i ve got some stock rear shackles you can have.just pm me your address and ill put them in the mail.i'll dig them out of shop this afternoon.

[Toyz]

I have plenty of stock springs and will gladly send you a set, just cover shipping!
The reality may be that you can probably locate some closer to home for less than shipping costs.
A question on my mind is what your caster and camber may look like with the stock springs!
Just one of those "what ifs" that tend to complicate mods!
I also have the rear hangers, waiting for my chassis builder/precision arc gouger to get a "round tuit"!