Slick 60's

Finally installed the 430. I ended up moving the transmission boss above the starter so I could use the FE bell housing. A few things left to clean up tomorrow. I plan on getting to the exhaust shop this Wednesday.

Never heard this exhaust note from my 65's.

https://youtu.be/UJoF3h4bx2c

I enjoyed the video. Thank you.

Nice!! Its strange how these are such "forgotten" engines. Good to see one still kickin'!
Thanks for sharing the video.

Thanks', here is a link to the 383-462 MEL forum. It has photos of the mock up.

http://ford-mel-engine.com/viewtopic.php?f=18&t=1687

chris401 wrote:Thanks', here is a link to the 383-462 MEL forum. It has photos of the mock up.

http://ford-mel-engine.com/viewtopic.php?f=18&t=1687

Chris,
Nice write up with pictures! That oil drain plug looks not-so-handy though!

I hope you update your progress!

BarnieTrk

BarnieTrk wrote:

chris401 wrote:Thanks', here is a link to the 383-462 MEL forum. It has photos of the mock up.

http://ford-mel-engine.com/viewtopic.php?f=18&t=1687

Chris,
Nice write up with pictures! That oil drain plug looks not-so-handy though!

I hope you update your progress!

BarnieTrk

I've been driving it to town and the dump with ear plugs. The exhaust shop wanted $290 to connect the MEL manifolds where the FE headers left off. For about $300 I can buy the tools and the materials needed to make my own manifold to tailpipe. Plan on doing that by summer.

Ok, so I got tired of the noise and projects piling up in the heat. Had it done by a shop that's pretty good. Only cost $400 for the full system. Here are the photos with the center dump exhaust manifolds. Never owned a quiet Slick, been wanting to do this for years.

http://ford-mel-engine.com/viewtopic.php?f=2&t=1761

Video: https://photos.app.goo.gl/xSTDTf1MyMNNsc4G6