BAR JOKE Guy goes into a bar, there is a robot bartender. The robot says, "What will you have?" The guy says, "Martini." The robot brings back the best martini ever and says to the man, "What's your IQ?" The guy says, 168." The robot then proceeds to talk about phy...

Barack Obama got out of the shower and was drying off when he looked in the mirror and noticed he was white from the neck up to the top of his head. In sheer panic and fearing he was turning white and might have to start working for a living, he called his doctor and told him of his problem. The doc...

Hi,

You need to find perches from the early model truck that came with an 302.
Junk yard is where I found them and they bolt right in.

Hi, All It's been a long time from my last post, I had a lot of back and neck problems but it's gotten better now. So I have found a 82 I-6 engine and 4speed stick trans. I would like to put this in my 66 truck. What would I need to do to get rid of all of the pollution junk and will I still be able...

DanSanDiego,
What are you referring to when you say inter-cooler?':?'
I'm trying to do the same thing install an A/c and would like to remove the fan and install elec. Fan.

Thanks

Also your truck looks real good.':)'
Elwood

Thanks Slickfan

If the mount and the big end rubber is good then the pressure plate was what I was thinking also

Thanks, FordBoy Pete

I didn't think of that I did not change the transmission mount it seemed stiff
and I did not change the big end spring rubber. So I will take a look at them this weekend.

Richard

Hi, ezernut9mm,

I'm using the 3 finger kind, that's what was on it.

I also replace all of the mount with new rubber

Thanks
Richard

When I put my engine back in my slick, I installed a new clutch and throw out bearing. new clutch pressure plate and had NAPA resurface the flywheel. In the hope that I would not have the same problem that I had, which was, when you let out on the clutch it shimmies . ':cry:' When I took it apart th...

Thanks, Cam That's what I needed. I thought that those bolt holes could be used for the A/C. And Yes, if you get a chance please take a photo of the bottom of the bracket and adj. pulley Just put in you profile and I'll check them out or email them to richard@standardprecast.com By the way that's a ...

Thanks, Ford4Jack and MadMaxetc for all of your help. That's just what I needed so I would be going in the right direction.


Richard

DONE

Hi All, I want to install an A/C in my slick.':help:' Being in Florida their are more HOT days then cold days. It has the 240 in it. And I was looking for anyone that might have A/C installed, that would have any photos of the engine or might know what kind of brackets I would need. Also where are t...

Jeffw,

Thanks I was trying to find a way to repair that, in hopes that it will work better The way it is now I have to go 30 mph before it get to 10 mph. Always guessing at what speed I'm going.':D'

Merry Christmas to all of my fellow Slick's and happy new year

I want to say THANKS TO ALL OF YOU for all of the help that I found here on Slick 60's. And for all of the nice replays that each one of you had on my Slick.

Am already looking for another one, maybe for next years project.':lol:'


Richard

Tbritt,

I used a 77 ford truck master cly. You have to use a 1" spacer when you install.

Same as the Disc brakes front end parts are all 1977 ford truck.

The Seats came from a Tracker that I found in the junk yard.

Thanks for looking. ':D'

ezernut9mm

It's the oem core support piece

hurk,
It's Gun Metal Gray With Silver powder coat Grill and Bumpers

Hi everyone, Just thought you might like some updates on my slick. getting close to being done just a few item left to be done, hope to get them this week while I have off.':)' http://i292.photobucket.com/albums/mm20/66elwood/IMG_1242.jpg http://i292.photobucket.com/albums/mm20/66elwood/IMG_1232.jpg...