I have used "DJM" suspension parts dropped beams in the past with good results. Be sure to find out if you need dropped steering arms (you will), and, if they offer them or if you have to modify yours. If it is the later, and you have to heat and bend your stock arms, send them out to be h...

Maybee this info can help. Front mono springs are avail. and will give you about 3" drop. Also, "More Drop" 1-510-261-1888 will exchange your axle for a dropped axle, I think 3 1/2" is all you can get there. You will need to bend the steering arm if you do both. Out back, You can...

tHANKS FOR THE WELCOME. WE ARE CURRENTLY BUILDING TWO SHOP PROJECTS, A '57 SHORT FLEET SHOPTRUCK, AND A '63 MOD LONG BED STEP. THE '63 HAS A FULL TUBE CHASSIS, MID ENGINE-TO A V-DRIVE, FABBED TWIN I-BEEN FRONT, TRAILING ARM REAR. 22"FRONT TRAVEL, 20" REAR. IT IS BEING BUILT TO COMPETE IN T...

Hi guys, Rob from No Limit here. Here is a little info. Our rack mounts to the axle. The kit comes with new steering arms to correct the geometry and the steering radius. With a u-joint on the rack, and one on the column, we use a keyed slipshaft to connect the two. So, there is load put on the rack...

I agree that this method is not the most widely used. Tooling cost is the biggest factor. It affects the big auto makers just as it does us. If tooling were not an issue, we (no limit) would go out and make a bolt in P/S box. Think of it, New cast housings, close ratio gears, double cleve bearings, ...

WOE there is a lot of talk on this. First off, I am the owner of NO LIMIT, I dent want to pretend that Iamb just a concerned blocker, or to hide my true agenda. How many people thought that the world was flat? the sun orbited the earth? the moon was made of cheese? More recently, all hot rods will h...