Got a little more done on the ol beast this weekend.
Front clip off next the cab
Now the cab is off today thanks to my wife and my engine hoist
The cab now sits in the garage waiting for complete refurb
The cab is not in to rough of a shape. It has some rustout in the passanger cab corner and the drivers floor pan. Next will be getting the bed off and insulating the overhead attick of garge to keep heat in that new ceiling heater will produce. Winter work ahead hope to get the box off before it snows. The black stuff was rust inhibitor of the time 20yrs ago may have been por15 dont remember for sure I dumped a whole can of it in each cab corner you can see where it was running out of the spot rust holes I will find out how bad they really are when the sanding starts.
Hey Dan they are strong looks like just a little surface rust inside. Might have to sacrife my worst fender to make some patches for the cab corners wont know till I start grinding and sanding on things.
Just posting some pics of the 65 F100 4x4 parts doner truck.
Only thing I need now is a steering wheel that is not so worn out that it can be refurbished the two I have now are too worn out to fix.
The bed you see in the previous pix went onto the 65. The plan was to put it there temporarily. Well yesterday on CL the needle in the haystack showed up. I will be bringing it home on Sat after thanksgiving. Paid $475 for it and a very straight and rustfree tailgate. Bed only has some slight surface rust and is missing the two rear fender braces or bottom side braces behind the tire. This is now going to be the bed for the 63. Its been a long hunt for that second bed.
Got the bed home yesterday didnt have time to take any pics till today. It has the rust in the usual places. The bed is pretty straight. I dont know what the spare tire holder is for. If anyone is interested in it let me know its yours for the shipping. Im not going to use it.
Now have to get the 65 out of the garage and get this in with the 63 cab and start working the bed and cab. Going to try and get the axles out from under the 63 frame and start working them too. Need to find a 72 or ealier with some lighter gears the 4:56s have to go. They are just to deep for this day and age. Great for dragracing and rock crawling not much else.
I had 4.88 gears in front and someone had changed the rear to 4.11. I love the 3.73 gears I have now. I would like to get that spare tire holder maybe I could use it on mine.
"Never underestimate the power of your actions. With one small gesture you can change a person's life - For better...or for worse." 1965 F250 4wheeldrive 390/4speed/dana 60 rear 3.73/dana 44/PB
It looks factory if you want it it is yours for the shipping. Its not the factory one for this type styleside bed. I found one on a 59 0r 60 styleside at the pull and save a month ago. I didnt have the right tools to get it and went back the next week and the whole truck was gone. It didnt stay around long. Anyway when I get it off if your still interested in it Ill find out what it costs to ship to you and it is yours.
"Never underestimate the power of your actions. With one small gesture you can change a person's life - For better...or for worse." 1965 F250 4wheeldrive 390/4speed/dana 60 rear 3.73/dana 44/PB
Lincoln is in the house time to get sparking on the 63. Have only gas welded in the past. So this ought to be a challange and fun at the same time. Just have to drop an outlet for the 230 V cord and get a can of gas. I picked up a nice little cart at Big R farm supply for $49.00. The brand is Metal Man workgear. I looked at one at Harbor Freight for the same price. No comparison the MMW is powder coated and appears to be of a heavier gage metal. Cant seem to tell where it was made. It has a us patent #. I also picked up a spool of easy grind wire thats it on the lower shelf.
I know this pic does not have anything to do with working on the 63 but just thought I would post up where Im at as far as getting going on the welding on the cab and bed. Finally got the 240 power set up got some extension cords and a few saftey items like extinquisers, masks, gloves and a few other items together. Now Im going to learn the art of wire feed welding by practicing on a few things before attempting it on the cab of the 63.
First project was replacing the glass top on our outdoor table. Spot welded in a corrigated metal top. It was interesting trying to get the metal to flow between 2 different gage metals without blowing thru it. I did that in a few places but overall with a little grinding and sanding and paint it should be usable. I have a long way to go to be as good a wire feed welder as others on this site I wont name them just look at the projects section and you will know who they are.
The 63 waits its turn in the backround. I have to get ahold of Tom at flashbacks and order up some cab corner and see what else I need to get.
Keep practicing on your welding and you will only get better and better. I am a tile setter by trade and learned to do my welding by trial and error, far from pro but getting better. Now if I could just figure out the TIG welder.
Welding is a lot of fun when you look back at what you have created.
Kevin
kstones63
_______________________________________
63 F100
29 Ford Sedan Delivery
99 F250 PSD, 4x4, CC
95 F350 Flatbed Dually Diesel
Just saved a little time on the 63. I found a rustfree core support in the pull and save about 3 weeks ago. The weather here on weekends has been pretty bad. Alot of rain so today was finally nice for a change. I went back to p and s today to get the core support I was afraid it might be gone. It was still there but someone had made my job easier as they had removed the front fenders for me. Only had to remove about 8 bolts including the 2 core mounting bolts. How easy does it get.
That's a great find....if your core support looked near as bad as mine you just saved yourself about 30 hours...at least that's how much time I spent rebuilding the bottom of mine. Nice of someone to remove them fenders for you
ken462 wrote:That's a great find....if your core support looked near as bad as mine you just saved yourself about 30 hours...at least that's how much time I spent rebuilding the bottom of mine. Nice of someone to remove them fenders for you
Yeah surprised they didnt take the support. Only eight more bolts to remove. It took less than an hour. It gave me a little time to wander the yard. I thought I would be there for at least 3 to 4 hours removing fenders and support. Pleasent surprise and the weather was nice for the most part slightly overcast and no rain. It dont get much better.
Here is the core support I am replacing. I know some of you out there would.... well I wont say kill but maybe sell your wifes mothers cat for a core in this nice shape. But if you find a nicer one you got to go for it.
It had a little rust bubble through over 20 years ago and I put some rust inhibitor of the time on it and then coated it with rustoleum paint very heavy. Its still not to bad for sitting all that time. You have to look close but you can see it down along the bottom edge starting to show through.