So my solution is to throw this 292 together ,so my heads are done waiting for me to pick up, my temp block is waiting to be checked and bored .40 over and im going to run my .40 pistons from my block that we will bore .80 or more in a year or so.
Full specs- to be cont.
-ecz-g heads: stainless valves: intake valve size , exaust valve size, new valve seats. ..I have $1k in these heads..this engine better run like a striped arse ape or monkey-my dads always said monkey but Ive been told its supose to be ape..
-ECZ-9425 4bbl intake
-Car dual exaust manifolds
-edelbrock 600 cfm-model name escapes me
- 302 aftermarket stock style dizzy with 292 shaft- duraspark II, newer cast design 'no oil port. But I havent bought it yet
-Full tru PCV system
The rest will have to wait..the total cost for my middle
parts is $495 that includes lifters, cam, pushroods...& tru roller timing chain if I remember right. Thats for the good stuff and its from mumfort but its still around there when shoping around for other brands. That does not include the cost of using my c2ae tough car rods replacing wrist pin bushings and all or turning my f600 forged crank down so f hat its true. So for now I'll just run my ebu rods on my .40 over pistons, and take any good used part and run it for a year at most hopefully, while I get my other goodies for it. As much as I dont like putting it together with used parts..with the risk of the 390 going south really quick..I dont have a choice and I can still sell this block with the best out of my 2 pairs of heads as a low milage motor.
Anouther thing is..I have no clue what color to paint it, obviously I have ideas but I'm undecided....but Ive thought alot about going with ford blue early or late, so that when I get some aluminium parts it will stand out more.. or just red or gold..I could go turquoise to match the truck a bit..I would have to be diligent to keep it looking nice if i went with a color as loght as carribean turquoise..and they probably don't sell that in rattle can. Also whats the best rattle can engine paint to use if I go that route? I used dupli color engine enamel with ceramic to paint my valve covers on my 390 4 months ago..it stains awfull easy..I only left blow by on them for a day and it started to stain..but its not to bad and is pretty durable for rattle can paint after wiping it with a oily micro fiber cloth that isnt the cleanest...I cant see any major scratches thread, but just trying to explain everthing the best I can. But a fresh motor shouldnt have any blow by or oil leaks if you did things right but things happen
Any thoughts & ideas are apprecieated







[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]
[/URL]



