New kid sayin' Hi

A place for discussion of off topic subjects. Pretty much anything goes - just keep it civil, please!

Moderators: Casey 65, Kid

TheTruant
Posts: 9
Joined: January 19, 2008, 10:50 pm
Location: Va

New kid sayin' Hi

Post by TheTruant »

Hi everybody, name's Dan, I'm 19 and live in Fredericksburg Virginia. Traded another car I had for a '66 F-250 last fall. Lurked around the site for awhile and thought I'd say hi and show you all some pictures of my truck and what I've done to it. Guess that's about all...hope you don't have dial up :oops:


Here's the motor as I got it. It runs GREAT. After running the numbers it turns out it's a '65 390ci block with '67 Mustang GT cylinder heads and intake. Hooked up some extra gauges under the dash...it runs 80psi of oil pressure on start up and is running 60psi going down the road most of the time

Not to mention that when I stuck the bore scope in one of the cylinders it was clean enough to read .030 over on the top of the piston...hehe...it's a fun truck for sure...sounds good at about 4,000rpm through those worn out glasspacks. :twisted:



Image

Image


Polished and painted valve cover...little nicer than the old one

Image


And my motor and engine bay all painted and put back together. Also re-wired my igniton after having some trouble with later on.

Image

Image


Next issue was the Dodge wheels :shock: :shock: :shock:

Image


Cut out some diamond plate and stuck it on the hubcaps...what Dodge? :lol:

Image

Image

Muuuuuch better!

Image


Put a cheap Autozne seat cover on it for a few weeks but annoyed the hell out of me being loose all the time. So I ordered a replacement seat cover from LMC and put it on.

Image


What was underneath.

Image


Finished product...all the wrinkles and wavy spots are out now that it's been used a bit.

Image

After all that stuff was done I went about making a center console to hold a radio and a couple cup holders.


Paper mock-up


Image

Front half layed out...

Image

Everything cut out...

Image

Also made a little lift out compartment for misc. crap to go in. Made it out of one piece (except the divider).

Image

Here's the fron half done. Lift out compartment is on the left (duh)

Image

Back half bent up and welded on..

Image

Cut out my CD player holder and tacked that in and also added some covers on the side (you'll see why later).

Image

Here it is after getting painted and wired...

Image

And here it is all done and installed

Image

Those covers were for a pair of LED strips I had laying around...stuck them on the side and wired them up to a switch. Gives the floor a red glow at night time, looks really cool.

Image[/B]

You can also see the 12V outlet I put in and the covered switched which runs a pair of back up lights/tailgate eliminators that I cut into the rear bumper...

Image

And here she is a couple days ago after a trip to the car wash.

Image

Image

Image

Image
TheTruant
Posts: 9
Joined: January 19, 2008, 10:50 pm
Location: Va

Post by TheTruant »

Oh yeah, also fixed a bunch of bad wiring, put on the missing emblems, undercoated the inside of the cab, etc. whistle.gif
User avatar
FORDMANLCRACKEL
Posts: 1237
Joined: July 11, 2006, 9:48 pm
Location: williamston, n.c.
Contact:
United States of America

Post by FORDMANLCRACKEL »

:welcome: Dan, Looks like a nice truck. You been busy. welcome.gif

Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
castruck_1964
Posts: 643
Joined: August 3, 2006, 3:45 pm
Location: Ramara Ontario
Canada

Post by castruck_1964 »

:welcome: Dan nice looking truck and keep up the good work :D
Slicks rule
dd/ 19 F150,97 Tbird
62 swb bbw uni next project
460 C6

Ken
User avatar
Slick Fan
Posts: 4085
Joined: November 4, 2006, 5:09 pm
Location: UTAH...snow blows!

Post by Slick Fan »

Welcome aboard! welcome.gif
Nice looking truck, you've been doing great looking improvements on it. :D
My "Slickitis" affliction began here...
Image


66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
TheTruant
Posts: 9
Joined: January 19, 2008, 10:50 pm
Location: Va

Post by TheTruant »

Thanks fellas wave.gif

About all I have left to do is re-skin that rusty tailgate and finish cleaning up some of the wiring. Got new brakes to put on it one of these days as well.
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

:welcome: Dan, you have a real good start going there!
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
GLindley
Posts: 562
Joined: July 11, 2006, 9:47 pm
Location: Springfield, MO

Post by GLindley »

welcome.gif Good job Dan! I like the colors of your tu-tone! Sharp looking truck!
Gene
1961 Intregal cab SWB 223 (getting 302 & TIB)
1969 LWB 302 automatic (Donor for the '61)
2000 F150 XLT SWB (Daily Driver)
User avatar
66fordtrucknut
Posts: 1289
Joined: July 11, 2006, 11:48 pm
Location: Eastern Shore - MD

Post by 66fordtrucknut »

Welcome to the club from Md. Eastern Shore, Great job, looks like your a fabricator which is what I've done for 30 yrs. Truck looks great!
Charlie
62' SWB uni 223
66' F-100 Short/wide 352
78' F-350 dually dumpbed 400
12' F-150 5.0 3:73 LS
ICEMAN6166
Posts: 11470
Joined: July 11, 2006, 11:28 am
Location: Dove Creek, Co. elevation 6842
Poland

Post by ICEMAN6166 »

welcome.
looks like you have done a great job so far on the truck.
:thumright: :thumright:
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
User avatar
Johnny Canuck
Posts: 8291
Joined: April 9, 2006, 11:14 pm
Location: Edmonton, Alberta.
Canada

Post by Johnny Canuck »

Hey looks great! Welcome to the club!! :welcome:
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
User avatar
Fanatic
Posts: 1568
Joined: July 14, 2006, 11:39 pm
Location: Leesport, PA

Post by Fanatic »

Welcome aboard!

Even with dial-up it was worth the wait.

Tim
INEPTOCRACY: (in-ep'-toc-ra-cy) : a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers.
User avatar
Hoofbeat Racer
Posts: 1782
Joined: July 6, 2006, 12:22 am
Location: Rocky Mountains, Alberta
Canada

Post by Hoofbeat Racer »

Welcome to the club. Thanks for all the great pictures! As you can tell we rely on other people's progress to help motivate ourselves :lol:

Keep up the good work!
Mark


Image
User avatar
PFM-64f100
Posts: 1270
Joined: August 7, 2006, 6:37 pm
Location: Haslet, Texas
Contact:

Post by PFM-64f100 »

:welcome: Very cool pictures I do like that console with the radio in it. it is better than cutting up the dash to install a radio. Keep up the good work.
64 F100 short bed-style side-460-c6-with side toolbox and Dakota Front Suspension
And a 65 CrewCab

Chris W.

The pickups
65 Crew Cab
http://www.purpleflyingmonkey.com/CrewCab/index.html
64 F100
http://www.purpleflyingmonkey.com/1964- ... index.html
The Torino project http://www.purpleflyingmonkey.com/1971- ... eFile.html
TheTruant
Posts: 9
Joined: January 19, 2008, 10:50 pm
Location: Va

Post by TheTruant »

PFM-64f100 wrote::welcome: Very cool pictures I do like that console with the radio in it. it is better than cutting up the dash to install a radio. Keep up the good work.
Yep, I was really againist cutting up the dash.


Thanks everbody! :D
f100matt
Posts: 645
Joined: August 5, 2007, 4:47 pm
Location: Kingston, Washington

Post by f100matt »

:welcome: Great lookin truck
-1966 Ford F100, 352, 4 speed, smoke grey, mustang buckets
-2003 Ford Ranger XL, 3.0, 5 speed
-1989 Ford F250, 460, highboy, 4x4
MrEvil
Posts: 187
Joined: August 19, 2006, 9:40 pm
Location: Amarillo TX USA
Contact:

Post by MrEvil »

Dan that's one heck of a truck you got there. And that's some darn fine fab work you did on that center console. I must say I'm jealous.

And kudos for getting rid of the anatomical cross-sections on your centercaps. The Diamond plate looks good.
Vehicles:

2000 F250 Superduty Crew cab
1998 Ford Crown Victoria Police Interceptor(work beater)
1961 F100 Uni (my baby)
1966 Thunderbird: someday.
samdog66
Posts: 24
Joined: November 8, 2007, 10:18 pm
Location: RHODE ISLAND

Post by samdog66 »

OUTSTANDING!
User avatar
jwh f-100
Posts: 1903
Joined: June 11, 2007, 6:25 pm
Location: Equinunk, PA
United States of America

Post by jwh f-100 »

Welcome!!! Nice truck!!
Looks like the one a PA member here was selling. Good to see a slick going to a good home. You'll see it in the "Trucks for sale" section. Glad to see it brought us a new member.
Keep up the good work.
Jason
User avatar
Slick Fan
Posts: 4085
Joined: November 4, 2006, 5:09 pm
Location: UTAH...snow blows!

Post by Slick Fan »

jwh f-100 wrote:Welcome!!! Nice truck!!
Looks like the one a PA member here was selling. Good to see a slick going to a good home. You'll see it in the "Trucks for sale" section.
Man, I knew I'd seen that truck somewhere, just couldn't remember where. :D

http://fordtruk.com/forums/viewtopic.php?t=2599
My "Slickitis" affliction began here...
Image


66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
Post Reply