Transmission Help

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
User avatar
64kust
Posts: 30
Joined: January 22, 2008, 6:12 pm
Location: Atlanta

Transmission Help

Post by 64kust »

I have a 302 with an FMX tranny and was wondering if i could put a C4 or C6 in it,,which is possible but would i have to change the drive shaft to do that??
User avatar
needmoretime
Posts: 239
Joined: July 12, 2006, 10:52 pm
Location: Middletown,Delaware

Post by needmoretime »

C4 is your best bet. The early C4's 67 vintage have a 24 spline input shaft. All later models have a 26 spline. This won't matter if you get one with the convertor otherwise you will need to count splines if you order a convertor.

Driveshaft is measured center to center of each yoke. The machinest will calculate the length.
cdherman
Posts: 1048
Joined: July 17, 2006, 6:36 pm
Location: Parkville MO (KC)

Post by cdherman »

Doesn't a FMX take a different bell housing?

Bells for 302 are easy to come by. I'd think a new convertor would be in the works as well.

Don't know the answer to the overall lenght question.
1965 F-100 240 Autolite 1101, Disk brake dual master upgraded, swapped over to C4 and powersteering. Bought by my Dad new in March 65'

1683

Planned/considered upgrades:
Perhaps power brakes, 300 I6 motor and JUST maybe, AC!
User avatar
64 litl un
Posts: 156
Joined: October 9, 2006, 11:26 pm
Location: Heart of Dixie

Post by 64 litl un »

The FMX or late Cruiseomatic is a very good transmission and is real close kin to a C6. They are very heavy because most if not all have an iron case. I would consider getting the FMX rebuilt. It will be expensive but maybe not as much as a new transmission and the modifications to make it work.
A C-6 may go right in. If you can find one with the 302 pattern.
Its no big deal getting the drive shaft cut and rewelded for a different length and yoke. A machine shop or spring place can do that for you.
If I were you and I was planning to change from that FMX I would go with an AOD. Why do all that work and not have overdrive. Early AODs had some problems but they were soon corrected.
I can drive it home with one headlight.
Post Reply