Transmission time

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Casey 65, Kid

Post Reply
User avatar
Mike P
Posts: 53
Joined: December 14, 2007, 8:24 pm
Location: Utah

Transmission time

Post by Mike P »

Just wanted to know is there a 5 speed transmission, that can be mounted on a 64 223? I need to get just a little better mileage but don't wish to change my rear end. Mike
oldtrucks
Posts: 1015
Joined: November 28, 2007, 1:59 am
Location: Pinehurst Idaho
United States of America

Post by oldtrucks »

Mike P
Try to find a 3 speed overdrive trans. Direct bolt in. There are still a few out there. I saw one on craigslist yesterday for $125.00.
Mike Kincheloe
Mikes Old Trucks
I restore old trucks and cars


1962 UNI Short Box, Stock Y block, 4 speed Image
1972 F 250 4X4 429 4 speed Dana 70 rear
1977 F 350 Camper Special, Ranger, Super Cab
1950 F7 Cab and Chassis
1976 F150 4 Speed 4 X 4
1996 Taurus
Gritsngumbo
Posts: 5441
Joined: August 4, 2007, 4:15 pm
Location: Monroe, Louisiana
United States of America

Post by Gritsngumbo »

You can use a Tremec (sp?) 5 speed with a bellhousing/adapter from John Mummert. (or they can modify yours: (http://ford-y-block.com/)
If you understand what you’re doing, you’re not learning anything.


LITTLE RED: 64 F100 Short Style
BIG RED: 62 F100 Long Uni
BIG “UN": 63 F250 Long Flare
BBW RED: 61 F100 CC BBW Long Uni
CRIMSON CREW: 63 F100 "Stageway" Long Flare Crew Cab
"RANGER": 66 F100 CC Long Flatbed
"AVA" 1963 Avion T-20 Travel Trailer
“Lucille” 1955 New Moon 44’ Travel Trailer
grabber64
Posts: 47
Joined: January 23, 2008, 12:21 am
Location: Evansville, IN.

Post by grabber64 »

is the four speed overdrive the tranny that came out in the 80's for the ford trucks? it looks like a newer style borg warner type tranny with an internal shifter. the shifter is mounted torward the front of the floor pan. similiar to the older granny four speeds. i have seen a few of these trans in the yards and they don't sell for much like 65 bucks. i haven't crawled under them to see the bolt pattern yet. i thought about checking into one of them for mine. they all have been behind 300's.
fmartin_gila
Posts: 1021
Joined: April 21, 2007, 9:58 am
Location: Mandurriao, Iloilo City, Philippines

Post by fmartin_gila »

About four years ago, I did what Gritsngumbo recommends.
very good setup from John Mummert, very close to a bolt up, I did have to find a shorter driveshaft. 17 MPG in town and 23 MPG on the highway behind the 223. Very pleased with the outcome.
Fred
Post Reply