Page 3 of 6

Posted: September 13, 2006, 5:34 pm
by Johnny Canuck
You mean Rock and Roll ain't noise pollution? :wink:

(That's a Rock and roll song title for those a little slow on the uptake)

Y'know Comet may have hit on something here that Chop and I have talked about before tho. I have a real hard time watching old Fords that exist in the condition of Comet's aquisition not go back to stock.

I Probably DON'T get Hotrodding, per se.

I look at those period rods as restorations of an era, somewhat the way he is looking to preserve an era for his parents I guess. I could never do like Chop and his dad or Comet are doing an slice up a good steel A or Duece or '34, when there are fiberglass bodies to use.

To me the steel belongs to the restorers at least for Fords, and for the model years from 1903-1947 When Henry was still alive. I love those old Fords, just the way they were, too much. I appreciate Ford-only rods from the era, but would not wreck a car to do one. If I had an old roadster body, and nothing else, maybe.

Posted: September 13, 2006, 9:45 pm
by Comet
JC, I knew it! :lol:
I appreciate those too. But to do them right means mechanical brakes and forget about freeway driving. All they are good for is 4th of July parades. Even guys that consider themselves restorers hop up the 4 banger flatties and juice the brakes. Drive an original Model A for a year and report back to me how much you like them restored. :wink: Museums is where they belong.
There are literally thousands and thousands of original restored Model As still around. I'm not cutting up a Tucker. These were every common man's car. They were used as plows, snowmobiles, trucks, and even daily drivers! :shock: While I dig them, they are not rare. Collectible, yes-rare, no. And believe it or not, a hot rodded Model A is worth more than a restored one. In fact, some people are buying good running older resto Model As and cutting them up to hot rod. Mine is far from that and has not been titled since 1962. Y'all have had plenty of time to buy it and restore it yourself if you wanted.
Did you know, I recently read that there are more '32 Fords licensed today than in 1932! :shock:

Posted: September 13, 2006, 9:53 pm
by castruck_1964
there are alot of glass ones out there registered as original 1932's
witch I am sure is what is upping the total.
When a buddy of mine bought a steel 33 he got several different tittles with it :shock: :?

Posted: September 13, 2006, 10:53 pm
by Comet
Yes and Brookville is repopping not only roadsters, but 3W coupes now in steel.

Posted: September 13, 2006, 11:37 pm
by Johnny Canuck
perhaps you never read my sig, Comet;

1927 Model T Roadster pickup- dad's first car
1963 F-100 SWB Unibody -driver
1964 M-100 LWB CC Mercury -4 years in the making


That first one there.
Drive a model A for a year? hah.
How 'bout drive a model T since I was 11? that would be a day or so short of 37 years, for those who were counting.
22 rock solid horses and 42 mph downhill with a tailwind. 2 wheel mechanical brakes. You can't have more fun with your pants on than driving your father's first car. :)

Way more fun than ANY fast car I have ever ridden in. It's never been in a 4th of July parade, or in the States at all , for that matter, 'cause it was built in Canada..and lived every one of it's 79 years here. 8) Museum? you'd have to pry it out of my cold, dead hands to put it there. Cut it up for a rod?:evil: I'd have to strap myself to the hood with logging chain to prevent that
I literally shed a tear when I saw Boyd Coddington cut up a restored 'T'. Before that, last time a TV show made me cry was the news when Bobby Kennedy was shot.:cry:
Sell it? Not on your life.

I doubt if I will pass this car on to my clueless son for fear of those things.:roll:
I am currently hoping for a bright grandson or nephew to come along.

A stock Model A is like a Lamborghini by comparison to a 'T'...
Yep, I love them old Fords. :D

Posted: September 14, 2006, 9:10 am
by The Big M
Right on. 8)

That is an interesting point about the original Henry steel. Once it's gone, it's gone. Just recently I saw an original Model A frame on eBay. Complete with wheels and tires, mechanical brakes, four-banger, the whole deal. In running condition too. The owner obviously pulled the body off to build a rod. Kind of a shame. He only got $1000 for it too.

Posted: September 14, 2006, 8:55 pm
by Comet
Johnny Canuck wrote:perhaps you never read my sig, Comet;
And THAT is what it's all about. Not the tin, it's the sentimentality. Thank you for making my point.

Posted: September 14, 2006, 8:59 pm
by Comet
By the way, most of the cars hot rodders are turning into rods, restorers wouldn't touch-too far gone. Don't believe me, check out the hot rodders sites. I'm amazed at some of the things people think are savable, but they make them nice. Boyd is different. He buys museum pieces to turn into rods. Even if I could afford, I wouldn't as I have an appreciation for the original stuff too.
Mine had some work done to it prior to my buying it, so although it looks nice, it didn't start out that way. It is nicer than most, but I don't have an original engine, tranny, gauges, interior, wiring, fuel tank, sheet metal etc.

Posted: September 15, 2006, 10:11 am
by Johnny Canuck
The Big M wrote:That is an interesting point about the original Henry steel. Once it's gone, it's gone..
Yep, 'zackly.
Don't need any more of it with a Chebby small block stinking it up.

Posted: September 15, 2006, 10:49 am
by FORDBOYpete
DID you say "HOT ROD" ? ? ? ?
Aren't rods early style/class & Latter day Tech/Comfort?

How about: A Flathead with Mass Air EFI, AOD, upgraded steering, suspension, brakes & todays creature comforts!. :idea: :shock: :D

21st century Tech, performance, safety, reliability & Creature Comfort in a early 20th century package. :roll: 8)


FBp 8)

Posted: September 15, 2006, 11:05 am
by The Big M
That sounds like a street rod. Comet is building a traditional hot rod. Big difference...

It would be interesting to see if EFI and a flattie would get along but I'd hate to see all those homely electronics hanging off it... :(

Posted: September 15, 2006, 11:15 am
by Johnny Canuck
Um so are you doing a restoration or a hotrod?
a hotrodder would do this
http://www.jalopyjournal.com/forum/show ... hp?t=70952

Posted: September 15, 2006, 12:22 pm
by The Big M
A flathead should have real Stromberg 97's, imo. Not some EFI setup made to look like them. Yuck.

Posted: September 15, 2006, 6:31 pm
by chop
I thought I felt my ears burning!
8)
Chop

Posted: September 16, 2006, 12:58 am
by Johnny Canuck
Chop you tell me you are putting a Buick Nailhead in that '35 i will hunt you down like a dog. :twisted:

Posted: September 16, 2006, 1:07 am
by Comet
Nail head would rock! 8) Torquey beast! :lol:
Do it so he gets off my back. He can't be in two places at once! :lol:

Posted: September 16, 2006, 5:37 am
by chop
36 5W coupe, 302/AOD, on a Fatman frame.
I am NOT cutting up the body.....just upgrading the chassis and drive train, with creature comforts...the ONLY body mod is we are filling in the roof opening :lol:
Chop

Posted: September 16, 2006, 10:58 am
by Johnny Canuck
Whew! I was getting pretty concerned that Chop might take offense, and my days as a Ford in Ford crusader were drawing to a sudden close in the way a fly and flyswatter meet. :shock:

NO sunroof in the old wood part Chop? That seems like a natural to me, if you could find one to follow the body line.. a small electric one like the one Matt got out of a Honda or something. Might not be a long enough flat part of the roof there to do it.. Maybe one from a modern VW Bug? Sure would be cool IMO.

That's a 36 eh... just going by your pic I mis-guessed 35. Coudn't see the grille.
Now my faith in Humanity has been restored :) .
Suddenly I am a lot more excited about your project than I used to be..
Long live the SBF!
:D

Posted: September 16, 2006, 11:33 am
by ELpolacko
the ONLY body mod is we are filling in the roof opening
The roof in my three window was already filled, but if you are looking for a donor skin, the 53-55 F100 roofs have a perfect countour and are just the right size.


Honda or VW roof? PHTHHTTTHT, some purist you are Johnny :roll:





:P

Posted: September 17, 2006, 10:25 am
by Johnny Canuck
He was already filling in the wood part.. that switches the purist part of the body work off.

Me? I wouldn't be doing that anyway, unless the vehicle was newer than 1947.

still my vehicles are as All Ford as I can make them... my Uni has a Chrysler volare front end that I am dying to get rid of but has all-ford running gear, even the steering column. My Mercury is as all Ford as I could be. Anything significant changed out from Stock is still Ford. My body man asked why I didn't use an Ididit tilt Column instead of a '79 ford.. I said "Does Ford own Ididit?".. so it goes like that.