Page 5 of 6

Posted: September 22, 2006, 12:33 pm
by Johnny Canuck
You use that 430 MEL and all will be forgiven :lol:

Posted: September 22, 2006, 12:34 pm
by ICEMAN6166
like a long winded novel this thread continues.
JC was kind enough to mention me in this as one who is against cross-contamination.
all of my Fords are Ford powered, not necessarily correctly as with my 66 f250 4x4 and its y-block.this conversion was rather difficult as i had to remove the rivets fron the front crossmember, move it forward 2 inches and drill 4 new holes in the frame.
i would not, could not ,ever consider a chevy or dodge power plant in a ford, nor would i do the reverse.
Ford is deep in my blood, my grandfather knew Henry , my father met Henry 2 a few times.between my father grandfather and uncles there are a combined 105 years of Ford employment.
almost 18 years ago, my father passed away. leaving me some shares of Fomoco stock.it was worth almost $70 a share at that time , i unloaded it some time later in the low $60s, glad i did as it was only $6 per share last i looked.
sad as it may be, General Ford motors may come to be but face it, we are losing the car battle
Detroit,the layoff city, does not sound to good.
the glass house is beginning to shatter from the rocks of toyota and honda
Bill Ford stepped down
the Henrys, and my relatives, are all rolling over in the ground.
the Ford willow run plant built planes for WW2, we won then but the losers came back for another battle, seems they are winning handily.

go ahead and do the deed if you wish.it does not make me happy but compared to going out and buying a ricer for whatever reason is not even worth a worry.

by the way i am getting a dodge soon, it is a 60s big dodge 4x4, but its free.if it doesnt run i will have to look for a dodge engine , none of the Ford ones will go in there.perhaps one of you should donate that hemi, that way it cant find its way into your FORD!

Posted: September 22, 2006, 9:59 pm
by Johnny Canuck
Ice. I wondered how long until you chimed in. Yet to hear from the other Ford men, FordboyPete and Farmer Bill, Aka F100XL. Hemis are fine in DODGE :fart: vehicles, no doubt.

Posted: September 22, 2006, 10:01 pm
by Comet
Johnny Canuck wrote:Hemis are fine in DODGE vehicles AND Model A's!
I fixed it for ya JC! :lol:

Posted: September 23, 2006, 7:07 pm
by Greg D
Go WAY off the wall, 368ci Mercury Turnpike Cruiser Y block, it's a late 50s engine, has dual quads, makes gobbs of torque, and talk a bout a step away from the crowd!

Posted: September 23, 2006, 7:32 pm
by Comet
That would be cool Greg. Just saw one of those on tv recently. I think that Dennis Gage show My Classic Car.

Posted: September 24, 2006, 8:32 am
by Johnny Canuck
Seen quite a few of those, in Turnpike Cruisers, actually. Man, those are one seriously ugly car. Especially when you have never heard of a turnpike. Thought they had been styled after an ugly fish for 20 years. :hm:

Still the only Turnpike I know in existence is the Jersey one... are there more?

Anyhoo.. yes that would make one unique rod.
Image

Posted: September 24, 2006, 8:42 am
by chop
Florida has or had a Turnpike (toll road) from Wildwood down to Miami.
Chop

Posted: September 24, 2006, 6:24 pm
by jimbob1021
i have owen them all from ford to a olds it does not matter to me what i drive as long as it looks good my very first car was a 1960 chevy with a in line six cyl and a two speed trans i also had a 1960 comet i built a 1966 fairlane with a 428 CJ and a 4 speed trans with 456 gears i build and sold a 1949 chevy coupe i also had two 1967 350 fastback mustang a 340 duster that ran a flat 12s in the quarter mile stock i also built two street rods one was a 1936 olds three window coupe and the other was a 1945 chevy short box pickup 350hp 350 with a 350 thans and a 1957 chevy rear diff. i also built and sold a 1970 mach 1 mustang. i could talk about what i have done all night but i wont put all of you through that i am just let all you guys know where i come from .cars have been in my blood for over 35 years :roll: :?: jim :lol:

Posted: September 25, 2006, 9:57 am
by Johnny Canuck
Sounds like you had some nice stuff Jimbob

a 340 wedge dual point Duster (stock) was the fastest car I had ever ridden in until I had a ride in a Porshe Turbo Carrera.. those Plymouths are a surprisingly fast car out of the box.

Posted: September 25, 2006, 5:27 pm
by mikecarson
They were fast, but shove a 440 in one of those A body MoPars and HOLD ON!!

Did that to a 70 Dart, and pretty much ruled the Waco stop light racing.

Posted: September 25, 2006, 6:42 pm
by Johnny Canuck
Guess that could come in handy there, Mike. Never know when they might drive a tank with a flame thrower thru your house... best to be able to get away quick. :P

Posted: September 26, 2006, 8:38 am
by FORDBOYpete
JC You know I'm in this same keep it "right" camp. :argue:
If I had to have Mopar power I'd have to own a goat brand pentastar ride. :bs:

If I had to have a Blowtie, or should I say a "Corporate Crapper" engine, I'd have to have A, a, . . . :rotflmao:
Well you know what I'm saying.

I've said this all B4. I know where I stand. Having said that, & Taken this position on this seemingly never ending topic of digression, anybody can do what ever they want to their FoMoCo product, but they can't expect others to admire, be enthused, or care about it. That's my :2cents: on corrupting something nice just so other people might be impressed, or pay attention to it. :roll:

That/ this is why I haven't jumped in here. It's a pissing contest I don't want to get into. This is basically FoMoCo based site and it's based on FoMoCo built 61-66 F series Pick Ups. They came with Blue Oval Built Engines.

I have run the gamut of corruptions, all for what? To be different, to impress people who don't matter? to create a bunch of work I don't need. . .WHAT?
I returned to OEM for they have the better engines that may not blow the skirts of swapper crowd up, but can sure enough reliably blow the doors off the mutations they build.

If I ever get around to throwing together a certain FORD 27 T Lake/ Track Style, Lo Boy Roadster it will have a 4.0L MAFS/EFI FoMoCo V6 with an A4OD and a dropped Single I Beam steering axle with 4 link radius rods, track bar & front disc brakes. . . . but no Off Brand mismatch power train. however I am drifting quite :offtop: :oops:

Now I gotta go get a few beers to recover from all this craziness about cross breeding mutants. . . . :? :hm:

FBp :cheers: :roll:

Posted: September 26, 2006, 8:25 pm
by chop
I am NOT trying to stir the pot here, but I have to ask this question.
I have always loved the old late 40's early fifties Studebaker pickups, and if I find one in good shape in the future, I will buy it. I don't know of any speed equipment/ aftermarket parts for a Stude motor. Most of yall know I am a resto-rodder, I like the old slightly customized body with all modern running gear that is brand loyal.
Would it be somewhat OK to drop in a 385 series Ford motor in something as "out there" as a Studebaker? I also want a 40-41 Willys coupe and no Willys motors out there either....
Again it is a hypothetical question....and my feelings won't get hurt. I know how most on here feel about putting a Ford in a Ford etc, but what about the above vehicles?
Chop :?

Posted: September 26, 2006, 8:55 pm
by castruck_1964
well chop
For the most part I agree with the rest on this cross mutation/contamination thing. That said when it comes to "off brand" vehicles such as these IMO anything goes with the exception of the corprate x universal street rod motors :barf: (sbc/bbc)
:oops: :hm: guess after that JC might revoke my membership in the Chebby haters club EH :laughing: :!:

Posted: September 26, 2006, 10:09 pm
by BigTim
I had a 57 Chevy truck that I would have loved to drop a FoMoCo motor into just to irritate the hell out of the popular thing to do crowd. But it would have just ruined a perfectly good truck, so I sold it and bought a Slick.

Posted: September 26, 2006, 10:19 pm
by Comet
Chop, Hemi in the Willys. THAT IS TRADITIONAL! And cool as hell.

Posted: September 27, 2006, 12:28 am
by Johnny Canuck
Funny I was just thinking about this as I was having my morning constiutional today.

The real purists seem to think that Willy's and AMC are now Chryslers, and that a Chryco motor is OK in those cars, however AMC made some nasty good motors that can STILL be built into wicked Chebby eaters (right Comet?) and it just don't seem right that you would stick a Mopar in an AMC to me. Willys? well Ford built Jeeps during the war.. In fact a lot of their 4x4 stuff from their own later 4x4's starting in '59 is supposed to be interchangable with WW2 Jeeps, I have been told. Not sure tho. I do know damn well no Jeeps came with Chev motors. Willys had the V-Six they eventually sold back to Buick...The one in the Grand Nationals.. Not sure why you'd want to use one of those in a Jeep tho..

Studebaker? Stude made some nasty wicked supercharged motors too, believe it or not. But at the end of their run they were using Chev motors. What would I use?

For a Willys I would be tempted to build up an AMC 401 like Comet did. For a Stude? Prolly try and find a supercharged 289
, but they DID use Chebby motors in Studes... so how could you complain?

Other off brands... Kaiser-Fraser, Tucker, Packard, and the like... I am not sure why you would want to rod one anyway....

Posted: September 27, 2006, 5:24 am
by mikecarson
There was a Vette shop back home that had a couple of those Avantis. Don't know what ever happened to them, Saginaw outgrew it's boundries, and the shop is long gone.

Posted: September 27, 2006, 1:59 pm
by Comet
My reference to a Hemi in a Willy's had nothing to do with the Willys/Kaiser/AMC/Chrysler lineage. But it had everything to do with the wicked Willy's Gassers of the 60's drag scene and NHRA. Gasser wars! 8) By the way, I have been re-reading some old Rodder's Journals and just got done reading one on a Willy's with a Ford Cammer in it. Now that was cool!