Page 1 of 1
swap from Dakota to full size hubs Question
Posted: April 17, 2009, 5:36 pm
by 65f100_Thug
Who hoo!!!!
I got a Dakota front end now i'm wandering what I need to do to get my 5X5 wheel to fit. do i need to swap spindles or just the hub or hub and caliper mount?????
[albumimg]5526[/albumimg]
[albumimg]5525[/albumimg]
Posted: April 17, 2009, 6:05 pm
by PFM-64f100
See this thread from the hints and tips section...
http://fordtruk.com/forums/viewtopic.php?t=7972
by the way looks like progress, you sure did get a big frame section...
Posted: April 17, 2009, 6:18 pm
by 65f100_Thug
thanks PFM!
I got a 89 Dakota suspension. maybe the 85 through 88 ram will work for me.
Posted: April 17, 2009, 8:50 pm
by Wollfe
You need the hub/rotor from a 85-92 ram
calipers for the ram were the same from the 78 to 92 for sure. as far as caliper brackets I have the brackets from a 85-89 but brackets up
to a 92 should fit? and possibly brackets as early as 78 might work
Posted: April 17, 2009, 10:28 pm
by 65f100_Thug
thanks ! Ill hit the salvage yard asap I need to be able to roll the thing around so i dong block the shop for paying customers. I didnt think to get the old wheels.
