Page 1 of 1

Another Project setting in my Drive Tonite

Posted: December 16, 2006, 10:53 pm
by Kid
Well I drug another Project Home Today. I got a 74 Plymouth Duster that has had all the metal work done on it, new floors and Quarters and the body is ready for small amounts of body work. I got Two Engines and transmissions for it and now all I need to do is decide what I am going to do with it. I am not sure if I want to work on it or stash it in storage. Best part of the deal is that it was a FREEBIE, all I had to do is move Two other cars for the guy with my Trailer and then load up the Duster and haul it home........Kid



65 F-100, close to stock and almost finished
64 F-100 on a Mercury car frame and has a 4in top chop
64 F-100 Short box, I-6 and 3 Spd
65 Barracuda, complete just needs restored
74 Duster now

Posted: December 17, 2006, 1:24 am
by Greg D
Wow, cool deal Darrell! Is one of the engines a 440? :dancing: I'm seeing a blower with a pair of skinnies on the front and a couple MT stickies on the rear and maybe Lime Green w green & blue/green flames or Plum Crazy w sorta stock type silver graphics! Just my off the cuff :2cents:.

Posted: December 17, 2006, 8:26 am
by mikecarson
Those A-bodies can be lightened up real easy. Like Greg said, a 440 if you have one. That's what I put in my 70 Dart, but that one was just barely street legal.

I put a built 360 in a 75 duster, with a 727 tranny. It was a good all around driver.

Had a 74 "340" duster, 4 speed, but it had the 360 in it. That had the fold down rear seat option. Lime green and white. Of all the Dart/ Dusters I had, that was my favorite.

Had 3- 64 Darts, a 340 Demon for a short time, a couple of Valients, and of course, a 37 Plymouth P/U. Used to really be into MoPar.

Posted: December 17, 2006, 8:33 am
by jakdad
Aaaaarrrgghh, Mopar guys should go Slant Six all the way!!!

Posted: December 17, 2006, 8:35 am
by mikecarson
I had a few of those, too!

Posted: December 17, 2006, 8:41 am
by 66fordtrucknut
Cool deal Darrell! Show us some pics.
Charlie

Posted: December 17, 2006, 8:51 am
by DV65CustomCab
When I was in school, one of my buddies had a Duster he inherited from his sister. 318 2bbl automatic with factory air that still worked! This car was incredibly quick; he used to win drag races with cars that you'd never thought he could beat. They'd never believe what he had under the hood until he showed them. :lol:
So don't disregard a small block. To put a big block in one I think you need a different (and very hard to find) subframe?
If you need any parts, let the MAC chapter know. There are quite a few of those in the 8000 car junkyard we visit. 8)

Posted: December 17, 2006, 9:31 am
by mikecarson
I used a 6 cyl K frame for my 440. Built a set of ears to mount the motor out of 6063 aluminum, 3/8 thick. I've lost my templates, but they were similar to this:
Image

Posted: December 17, 2006, 10:11 am
by Greg D
Wonder how much work it would be to put a Viper V10 in a duster?

Posted: December 17, 2006, 12:42 pm
by ICEMAN6166
i have not seen one of those in quite a while.hope it is a worthwile project.the dusters look pretty good when they are clean and done up right.a friend of mine had one many years ago we used to attract the police when riding around in for some reason. :dontknow:

Posted: December 17, 2006, 2:02 pm
by Johnny Canuck
Buddy of mine had a 71 340 wedge Duster with dual point ignition, 4.10s and a 4 speed and that car was SCARY fast. We never lost a race in it when I was riding with him, the best one was the guy we smoked in the 455 Buick GS, he was P!SSED!! :rotflmao:

the other thing scary on that car was the brakes. I don't think I would go with skin-flick front tires on one of those cars, they barely slow down as is... :shock:

I believe there's a relatively easy swap-out on those older Dodges to Volare or maybe Caravelle disc brakes. I stumbled across that while looking for info on fixing my kid's Dodges, but didn't pay too much attention to it then.

Be the most worthwhile thing you could do if it still has drums.

Posted: December 19, 2006, 12:13 pm
by kid2
The engines I got with it are a 318 and a 360, the trans are a 727 and a 904, i think. I was told the 318 with a set of 340 or 360 heads and a few other goodies will make it a sweet running car. We are going to pull the engine this weekend in Matts 64 Thunderbird and get it built so i am gonna stash the duster up at matts for a short time, I got a Chevy pickup I bought that needs head gaskets I am gonna change and resell it right away to finance some paint on the Duster, it is all sanded down to bare metal. It is still setting on the trailer in my drive so I will try to get a pic of it. I took my Wife with me when I went and looked at it and was suprised how well she took the news that it was mine, I firmly belive it is easier to ask for forgivness than to ask for permission, LOL. I know it isnt a Slick but always had a love for the old Mopars, my first car was a 66 Charger and someday I want another.............Kid

Posted: December 19, 2006, 12:38 pm
by Johnny Canuck
Kid my buddy that has been working on his friend's '65 Tbird for 2 years is, ironically, a dyed in the wool Dodge guy.

He is shocked at how >>>CHEAP<<< FE parts are :shock: , so that gives you some idea what to expect when shelling out for a Dodge. Those insane Barrett-Jackson prices have run Dodge part prices thru the roof.

I dunno much about Dodge small blocks, but they dont swap like you would think. All kinds of Crank/head/block/pan/mount configurations do NOT interchange. Very confusing.

Posted: December 19, 2006, 3:19 pm
by Comet
I think something like this would go nicely in it:

Image

Posted: December 19, 2006, 3:32 pm
by Jarrod
Put one of those small block 440 motors from Mopar Perf. Same exterior dimentions as a 318/360 but a big stroker crank in it