Slick 60's

Does anyone know where I can buy a NEW,STOCK cam for my 68 240?
I would also like a new cam gear as well.
Also who makes the best rod and crank bearings?

Tanks!!!

http://www.napaonline.com/MasterPages/N ... &VehCode=Y

I looked this up using a '68 f-100 with the 3.9 240. I always try napa first then advance, auto zone. These are the 3 local auto parts stores around me. you should be able to get one from summit or jeggs also. hope this helps..... Anthony

If all else fails, try Egge and Kantor.

Fred

http://www.northernautoparts.com/Produc ... elId=19239

Ford 240 1967-1974 Cam Kit $136.77

Includes:

* Federal Mogul stock style Camshaft
* Federal Mogul stock style Lifters
* Melling stock style Timing set

I usually check northern auto if I'm looking for the cheapest

Thanks to all for the info. I will try all of the above.

these folks have really solid products developed for inlines, if you want to take it up a notch: http://cliffordperformance.net/

i've been real happy with their upgrades and service. (their 240cid parts are under the "300" tab).

good luck!