Page 1 of 1

2000 Lb. Engine stand

Posted: January 15, 2007, 12:31 pm
by jakdad
Any of you ever used this stand or one similar? Thinking about buying it for more stability.
http://www.harborfreight.com/cpi/ctaf/D ... mber=47304

Posted: January 15, 2007, 1:18 pm
by ICEMAN6166
Jim, i have one quite similar, held up the FE with no problems.

Posted: January 15, 2007, 1:36 pm
by jakdad
Thanks, Thats what I'm working up to. I have a few stands but the thought of a fully assembled FE on the lighter stands is scarey. I'm going to pull my 427 before long and go through it.

Posted: January 15, 2007, 4:14 pm
by Chris' dad
Bought an identical one from a local parts store. I've had a complete flathead hanging from it for about a year now. I made a support for the front of the engine just because my luck sometimes takes a turn to the south. If you buy one check the welds. I had to reweld one of those mounting arms.

Posted: January 15, 2007, 5:21 pm
by jakdad
Thanks for the tip Dad. I do things like that too. I actually plan on welding a couple of straps across the legs to have a place to set a drain pan. Or I may just hitch pin them so they are removable. Dang Hot Rodders can't leave anything alone............... :lol: :lol: :lol: