Page 1 of 1

Wiston cup 4 speed on Ebay?

Posted: January 16, 2007, 12:41 am
by 64 f100
Impressive looking tranny, forget what it's called exactly. Sidloader with fancy cases, supposedly 8 thousand new. Doesn't say what it will bolt up to. Sure sound impreessive though. Bid is at 815 at the moment. Anyone know about what these transmissions are?

Rich

Posted: January 16, 2007, 9:50 am
by 64 f100
More information. MidValley racing transmission, item 220071151637. They e-mailed me saying it replaces a super T10, GM?

Rich

Posted: January 16, 2007, 10:04 am
by jakdad
The NASCAR transmissions bolt up behind Ford,GM Mopar,Etc.Don't remember what is used for a bell housing. You can switch engines in those cars and not change anything but the engine. Frames, rear ends, trans all same stuff other than gear ratios. I know this is not much help but from my own racing experience, I wouldn't use one of these in a street car. Too noisy for one thing with straight cut gears.

Posted: January 22, 2007, 7:54 pm
by 64 f100
Thanks Jim, went to high for a street vehicle anyway. Sure looked like a preccision built unit though.

Rich

Posted: January 22, 2007, 10:17 pm
by 6166 Junkyard Dog
I have built a couple of the toploaders & the syncro's were left out sometimes or the brass we could trim down & the small teeth would grind off so did not have to use the clutch when shifting,, Then a company came out with the gears made like that, like Jim says not pratical in a street machine but good for some high performance racing that you need to speed shift without using the clutch since that will slow you down