Page 1 of 1

60's Thunderbirds????

Posted: February 10, 2007, 11:43 pm
by f100fordguy
Alright guys now that I got 2 fridge trucks done im trying to decide what to do with al the extra money im saving by not buying parts all the time. I've been thinking about doing a car for quite some time and for some reason the 64-66 tbirds have cought my eye. do you guys think it would be worth doing that or say a falcon/ galaxy. Ive also got another fridge i could do as a pro-street truck too (right now its a 223 with a FOM 3/4 ton 2wd) in very rough shape but saveable. also wanted to know if the bird is worth doing, if you know anyone with one for fairly cheap and in a restorable condition.

Tim

Posted: February 11, 2007, 10:08 am
by DV65CustomCab
My grandmother owned/drove a '66 T-Bird exclusively for most of her life that I knew her. I had thought of keeping it as it was a nice original car but I was never comfortable behind the wheel of it. The driving position just didn't work for me.
They aren't worth very much, and will cost quite a bit to restore. Not a good investment for something you don't plan on keeping.
Falcons are reasonably popular and not expensive to restore. Galaxies are coming into their own and are going up in value. I just haven't seen the market on mid 60s Birds doing much. They are big, heavy cars and aren't performers by any means, which may be part of the problem. The ribbon speedo and seqential taillamps along with the power vent windows are all potentially expensive problem areas.

Posted: February 11, 2007, 10:42 am
by mikecarson
My boss put nearly $20,000 into a 66 Tbird, and it ain't worth $8500 on the open market.

Posted: February 11, 2007, 12:29 pm
by Truckfarmer
I have always liked the style of the 64-66 Birds. In fact, I think one of these "Gentleman's Hotrods" would the perfect vehicle for the cross country runs like the Americruise or Hot Rod Power Tour. Get in, tilt the steering wheel, set the cruise control on that 390 or 428, and relax in the air conditioning. The guys I have talked to that have driven those trips always talk about the flat-out top-end runs made across the desert. I think the Thunderbird would be just off an idle.
I met a guy years ago that was a salesman and would put lots of miles on his car. When the car was 2 years old, it was worth a LOT less than what he owed on it. His solution at the time was that he rebuilt/restored a 66 T-bird to use as his dailly driver. He claimed he could restore an old car for $6000-$10,000 at the time and it would still be worth most of that after driving it 2-3 years.
I have a 65 T-bird here in my yard that I wil never do anything with. I have $650 in it if anybody needs a new project.

Posted: February 11, 2007, 2:06 pm
by ICEMAN6166
i let a 63 tbird go a few years ago with an hp390 because i figured it would sit for a while.i could have had it for $500 and im still kicking myself about it.i went back after a couple months and it was gone.even my wife liked it.
lots of mustangs,fairlanes and galaxies out there , one of the reasons i got into slicks is because i did not see many around and wanted something different than the rest of the crowd.

Posted: February 11, 2007, 7:20 pm
by Johnny Canuck
Other than the two-seater's, I'd say all T'birds are an acquired taste, kind of like liverwurst.
The SC coupes and the 67-69's with the suicide doors were cool in their own way, for me, but the big tubs in the late 50's and early sixties and early-mid 70's were definitely not my cup of tea., nor many other people's either. The 64-66 T'birds were one heavy land yacht no matter how big a motor they shoved in 'em (biggest was a 390 to my knowledge).

So big cars with big motors, as opposed to pony cars, small cars with big motors, have never held much appeal for the general baby booming public (me included). I seriously doubt you would get your money out of a restoration of one of them I am sorry to say.

Posted: February 11, 2007, 9:02 pm
by ripsnorter
From my experiences at the auctions and auto traders over the years, they really arent worth much. My father and I have 11 Lincoln Mark IIIs between the two of us, and theyre in about the same shape. Gentlemens car, very nice to just cruise in, but not worth all that much.

Posted: February 12, 2007, 9:31 am
by FORDBOYpete
FWIW (For What It's Worth) Many 66 Blunderbirds came with 428 CJ/FE Engines & C-6 A/T. They use Forged Cranks, LeMans Rods & Forged Pistons. Cranks have CJ hand stamped (not cast or forged) in it. But even with a 428 the beast was a 6,000# slug that handled like a bowl of soup (kept slopping over) when in motion. In addition as pointed out above, they are EXPENSIVE to bring back or keep up, and have little or no Value as a collectible to anybody but a dedicated & weathy T-Bird Fanatic. :dontknow:

I agree the old 55-6-7 Roadsters were special. But they had essentially what amounted to 54 Passenger car suspensions, old "Pre 9" rear axles (excluding 57s they had 9's)and Flathead transmissions (basically). :hm:

A lot of folks disagree with my next claim, but I like FOX Bodied, 83-86, Generation 10, Aero Coupes. I have an 85 Elan & and 85 Plain Jane I'm putting a roller 5.0L MAFS/ EFI in. That FOX Body style is what Wild Bill form Dawsonville put down the 220 mph Laps at Talladega AL with. They have the Airfoil thing down! :shock: :steering:

Besides, any vehicle that has all those creature comforts & still weighs in under 3,000#, road ready, is Okay in my book . . . . . But of course everybody knows my drummer has a different tune from a different book :lol: :roll: :roll: :lol: :rotflmao:

FBp :hello: :2cents: :thumright:

Posted: February 12, 2007, 10:50 am
by The Big M
I've always loved T-Birds, and from what I've seen they're still popular with restorers. Though I admit I have no idea what they're worth. I'd love to have a 61-63 or 64-66. Even if they do handle poorly. They're not supposed to!

My brother had a '93 SC. That was a sweet car, even though it was cursed and had a habit of eating AOD's. My dad has an '88 LX that was in excellent shape when he got it (38,000 km about 3-4 years ago) but turned out to be full of gremlins. I always liked the sleek looks of those, but the handling was very dissapointing. It looked a lot sportier than it was. Pretty gutless for a 5.0 too... :dontknow:

Posted: February 12, 2007, 11:19 am
by Greg D
Like most have said they don't seem to be worth alot and can be expensive and a pain to restore. As with all old cars/trucks it should however be a labor of love so to speak. I will give em this, they do have a certain amount of cool, I would be thinkin ragtop if it were me. Had a uncle that had a 64, neat car, horrid mileage. I would at least be tempted to run a 460 with a overdrive tranny in one so it would at least get semi passable mileage on the hyway. I know this is quite a bit newer but seems to be gaining in value, is also fast, and reasonably economical to drive - 87/88 T-Bird Turbo Coupe. I do not pick the stuff I want based solely on value, but if you should need to sell it someday...... Just a little food for thought.

Posted: February 12, 2007, 1:18 pm
by FORDBOYpete
You can get plenty of "stuff" to make Gen 10s run & handle but CFI engine has to go. Replace it with MAFS/ EFI & performance Chip, in a roller engine 5.0 or 5.7. Progressive springs, Progressive shocks, (I Use Sensa Tracks) Poly G bushings & substantial rear Anti Sway bar make a world of difference. If 1/4 mile matters, Built 8.8 or a 9" adapted to FOX Platform is a nifty ticket IMHO.
BUT I've Hijacked this thread :oops:

It's not about Gen 10s & about what I think/ Do either. :roll:

A Negative factor is even those guys with the 4 door Blunderbirds look down at me. . . Heh heh hee :lol: :shock: :lol: :roll:

FBp 8)

Posted: February 12, 2007, 1:37 pm
by kid2
I like the Old Birds, Would like to have a 61-63 someday. my Brother has a 59 and a 63 and Matt and I are working on his 64. I guess it is like our trucks if you like them and want one Build it.....Kid

Posted: February 12, 2007, 6:43 pm
by Hawkrod
FORDBOYpete wrote:FWIW (For What It's Worth) Many 66 Blunderbirds came with 428 CJ/FE Engines & C-6 A/T. They use Forged Cranks, LeMans Rods & Forged Pistons. Cranks have CJ hand stamped (not cast or forged) in it. But even with a 428 the beast was a 6,000# slug that handled like a bowl of soup (kept slopping over) when in motion. In addition as pointed out above, they are EXPENSIVE to bring back or keep up, and have little or no Value as a collectible to anybody but a dedicated & weathy T-Bird Fanatic. :dontknow:

I agree the old 55-6-7 Roadsters were special. But they had essentially what amounted to 54 Passenger car suspensions, old "Pre 9" rear axles (excluding 57s they had 9's)and Flathead transmissions (basically). :hm:

A lot of folks disagree with my next claim, but I like FOX Bodied, 83-86, Generation 10, Aero Coupes. I have an 85 Elan & and 85 Plain Jane I'm putting a roller 5.0L MAFS/ EFI in. That FOX Body style is what Wild Bill form Dawsonville put down the 220 mph Laps at Talladega AL with. They have the Airfoil thing down! :shock: :steering:

Besides, any vehicle that has all those creature comforts & still weighs in under 3,000#, road ready, is Okay in my book . . . . . But of course everybody knows my drummer has a different tune from a different book :lol: :roll: :roll: :lol: :rotflmao:

FBp :hello: :2cents: :thumright:


The flair birds (64-66) are definitely an acquired taste. You will be hard pressed to build one and sell it for your expenses but they are great cars. We have a great forum over at squarebirds.org you should check out although it has been slow of late. The 66 was available with a 428 but it unfortunately was nothing like Pete described it. It is a plain 428 with no special parts. It has a cast crank like any other 428 (including Cobra Jets) as Ford never marketed a forged crank for a 428 and only the 427 and some truck engines were so lucky. Also the cranks are marked 1U not CJ as are all 428's made before November of 68 including Cobra Jets because they used the same crank. The rods in a Tbird are just plain old standard rods and none ever came with Le Mans rods and they also did not use the heavy duty rod as used in the Police Intercepter and Cobra Jet. In fact, a standard 428 rod is the exact same part as a standard 390 rod. The pistons in a Tbird are cast just like all other 428 pistons as Ford never used Forged pistons in any of the 428's including the Cobra Jet or Super Cobra Jet. And finally a 64-66 Tbird will tip the scales right at 4,000 pounds unless it is a ragtop and then it can get up to about 4200 or so according to people in our club who have weighed theirs (there was so much myth that a few guys got curious about teh reality! LOL). Hawkrod