Page 1 of 1
Question for Skip
Posted: February 13, 2007, 11:27 am
by 64 f100
I was trying to remmember which tank you used when you took the one out from behind the seat? The 64 to 66 Mustang only had a 16 gallon tank, and was kinda wanting an 18 gallon one.
Anyone know of a good alternative to the stang tank? Seems like the cheapes way to go to me.
Rich
Posted: February 13, 2007, 12:01 pm
by mikecarson
Posted: February 14, 2007, 11:47 am
by 64 f100
Thanks, Mike
Posted: February 14, 2007, 5:34 pm
by BigTim
I hear that a Bronco II tank works as well, without trimming the frame.
Posted: February 14, 2007, 6:14 pm
by Johnny Canuck
NOt sure where you got that idea, tim.
[albumimg]33[/albumimg]
I had to take a cross member right out between the back spring perches
Posted: February 14, 2007, 8:49 pm
by BigTim
You had to take out a crossmember, but did you have to cut the framerail too?
I wish I could speak from experience, that would be one less thing on the to do list.
Posted: February 15, 2007, 9:16 am
by Johnny Canuck
NOpe just cut out the rivets and took out the crossmember.
Posted: February 16, 2007, 11:02 am
by 64 f100
How many gallons does the Bronco 2 gas tank hold? Were these tanks prone to rust out?
Thanks,
Rich
Posted: February 16, 2007, 11:25 am
by Johnny Canuck
Cant remember off the top of my head rich... 18 gallons? I think
they are made of the same tin all other gas tanks are,,, they will rust just as fast as any other.
was more important to use the side filler off a '78 on mine than the size
http://fordtruk.com/forums/viewtopic.php?t=1525
but it's a decent size.
edit looked up pugsly's site, it's 23 US gallons (I must have been thinking in Imperial gallons

)
http://www.angelfire.com/mech/jims65/re ... stall.html